The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools
Old June 7, 2010, 11:20 PM   #1
Junior member
Join Date: March 22, 2009
Location: U.S.A.
Posts: 817
Striping wood AK furniture

I have aquired some old Romanian AK furniture, I want to strip the crappy shellac off and possibly draw out the stain and re-apply a better looking color.

What might work best for this in anyone's experience? I'm thinking acetone for the shellac yet I don't know if it would pull stain out of the wood though.
essohbe is offline  
Old June 7, 2010, 11:31 PM   #2
Senior Member
Join Date: March 27, 2006
Posts: 1,460
I would try using lacquer thinner - available at hardware stores - as it will do an amazing job removing shellac and varnish. I don't think acetone will do much more than clean the shellac.
hoghunting is online now  
Old June 8, 2010, 09:32 AM   #3
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,088
If it's shellac then you will need alcohol to it. Alcohol is the solvent for the shellac.
jaguarxk120 is offline  
Old June 8, 2010, 11:41 AM   #4
Join Date: July 7, 2008
Location: Upper midwest
Posts: 4,410
A citrus-based stripper, such as Citri-strip, or the green one made by Zinsser, will remove shellac nicely and work faster than alcohol or lacquer thinner, without any of their hazards of toxicity and inflammable vapors. Some of the color will likely come off along with the shellac.

If it's that nasty red stain you're dealing with, once the finish is off, your best bet is probably to modify the color rather than remove it; red stains are notoriously hard to remove by any means whatsoever. But once the finish is off, you can use a green aniline dye to change icky red to a fairly nice shade of brown...
"Once the writer in every individual comes to life (and that time is not far off), we are in for an age of universal deafness and lack of understanding."
(Milan Kundera, Book of Laughter and Forgetting, 1980)
Vanya is offline  
Old June 8, 2010, 04:55 PM   #5
Junior member
Join Date: March 22, 2009
Location: U.S.A.
Posts: 817
Thanks for the replies! I figured denatured alcohol if not acetone.

I'm not picky, green aniline dye may be just what I'll do.

essohbe is offline  
Old June 10, 2010, 03:25 PM   #6
Senior Member
Join Date: February 5, 2000
Location: Bedford County, Virginia
Posts: 502
I used acetone. Not like with cotton balls. Like with a 5 gallon bucket overnight.
tackdriver is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 03:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05608 seconds with 9 queries