The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old May 30, 2010, 10:00 PM   #1
Clark500
Senior Member
 
Join Date: February 12, 2010
Posts: 168
Help identifying rifle

I was wondering if anyone might know anything about this rifle. I know some personal history for it (it has a pretty cool history - at least for me), but I really don't have any technical info on it: Who made it, when was it made, etc. The only technical thing that I "know" is that it is a 32 rimfire (and even that I'm not sure of). It has an amazing lack of markings... The only marks I can find are 2 possible stamps inside the trigger guard. They appear to be numbers, but they are so small that I can't really tell. Any help would be appreciated.

1.JPG

2.JPG

3.JPG
Clark500 is offline  
Old May 30, 2010, 10:01 PM   #2
Clark500
Senior Member
 
Join Date: February 12, 2010
Posts: 168
1 more pic showing octagon barrel.

4.JPG
Clark500 is offline  
Old May 30, 2010, 10:51 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,445
The gun is probably Belgian (look for a proof mark of an oval with ELG on or around the breechblock) and is a modified Flobert action in that it does have a breech block and the breech block is locked into the receiver, a stronger arrangement than some other guns of the general type.

There is a mild collector interest but the gun has basically a novelty value (IMHO maybe $100-150). It should be safe to fire and .32 rimfire is, or soon will be, available in limited quantities. But I would not recommend trying to alter it to center fire or to a more powerful cartridge.

Jim
__________________
Jim K
James K is offline  
Old May 31, 2010, 10:24 AM   #4
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,074
It is a Warnant system Flobert, beefed up from the original design with a "trapdoor" breechblock. Still not real strong and not of very high grade metal. They were sold all over the world in the late 19th and early 20th centuries. A large number of used guns were imported here in the 1990s, most in very worn condition. Not worth a lot of cash, so it is nice to have a story to go along with it.

Nearly all were made in Belgium, many by Peiper, which was a major company at the time.

If Jim K.'s prediction on a fresh supply of .32 rimfire ammunition pans out, there will be dancing in the streets. There are a lot of .32 rfs out there that people would like to try out.
Jim Watson is offline  
Old May 31, 2010, 12:07 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,445
I saw on another site that someone (I think Southern Ohio Guns) was in the process of importing a batch of .32 rimfire. I don't know if it is Long and Short or just Long. I have a fair supply of the old Navy Arms ammo, but wouldn't mind getting some more.

I know some authorities insist that no smokeless powder ammo should EVER be fired in a black powder era gun, but I have done so with no problem, as the makers keep the pressures low. I do agree that some guns, like those old revolvers with paper thin chamber walls, should not be fired with anything.

Jim
__________________
Jim K
James K is offline  
Old May 31, 2010, 05:47 PM   #6
Clark500
Senior Member
 
Join Date: February 12, 2010
Posts: 168
Thanks for the info guys. I had no idea where to start looking, but the info you gave me got me pointed in the right direction.

I found the exact rifle in the 1895 Montgomery Ward catalog for a whopping $3.25!

This rifle's story goes like this... The rifle originally belonged to a man named John F. Morgan, whose claim to fame was that he was the last man publicly hanged in the state of WV. This hanging was attended by my great grandmother (she was only 9 or 10 at the time). I am not exactly sure how she ended up with the rifle, but I assume her parents purchased it and passed it on to her. It has been in the family ever since. Another interesting bit is that the judge who sentenced Morgan to hang (Reese Blizzard) lived only about 2 blocks from my home. Unfortunately, his home (known locally as the Blizzard Mansion) was demolished a year or two ago. The road leading to his home is still known as Blizzard Drive.

Last edited by Clark500; May 31, 2010 at 08:33 PM.
Clark500 is offline  
Old June 2, 2010, 12:19 AM   #7
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 35,985
I would bet that it's actually chambered for the 9mm Flobert cartridge. Very common chambering for this type of rifle back in the day.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old June 2, 2010, 02:29 AM   #8
natman
Senior Member
 
Join Date: June 24, 2008
Posts: 1,429
Is it rifled or smoothbore?
natman is offline  
Old June 2, 2010, 03:17 AM   #9
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 1,447
I would check the bore on that. I had come into one in .22 that was missing parts and used the barrel to put a liner in. The barrel was undersize slightly. I remember that because I had to take the lead on my drill down to fit. Some of that older foreign stuff had strange dimensions.
Gunplummer is offline  
Old June 2, 2010, 06:45 AM   #10
Clark500
Senior Member
 
Join Date: February 12, 2010
Posts: 168
It is rifled. The Montgomery Ward catalog for 1895 lists the caliber as .32 short rimfire.
Clark500 is offline  
Old June 2, 2010, 08:27 AM   #11
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 1,447
Anybody interested in a stock and trigger guard for the .22 model?
Gunplummer is offline  
Old June 2, 2010, 12:04 PM   #12
Clark500
Senior Member
 
Join Date: February 12, 2010
Posts: 168
I may be interested. Does the stock still have the buttplate?
Clark500 is offline  
Old June 3, 2010, 03:31 AM   #13
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 1,447
Clark 500

It has the buttplate but it has rust on it. The barrel channel is .750 across the flats. The trigger guard is there and I have some of the firing mechanism. Remember, I said it was a .22 originally.
Gunplummer is offline  
Old June 5, 2010, 10:14 AM   #14
srcal
Junior Member
 
Join Date: June 4, 2010
Location: Plantation, Florida
Posts: 1
Symbol ELG in an oval

I have a rifle with the markings ELG in an oval and next to that there is a star and what looks like a 7. The barrel is 5 sided and the hammer has two cocking positions. does anyone know anything about this gun and why does the hammer have this function. I know its Belgian, proofhouse is Leige, but thats all I know. I have not seen a gun like this one on any sites that show, mention the markings. I am very interested in finding out about this rifle, it was given to me by my wifes grandfather so it has sentimental value. I will try to post a picture of the rifle because all the ones I see do not look anything like mine.

Thanks
srcal is offline  
Old June 5, 2010, 11:45 AM   #15
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,074
A 5 sided barrel is highly unusual.
A hammer gun normally has a safety notch for carry and a full cock notch for shooting.
There are all manner of proof and inspectors' marks that show up on guns. Some of them can be tracked down, some can't.

It is going to take those pictures for anybody here to discuss your gun.
Jim Watson is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09245 seconds with 10 queries