The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old May 19, 2010, 02:58 PM   #1
davecharles
Member
 
Join Date: January 3, 2010
Location: Carbondale
Posts: 60
93 mauser action screw thread

I'm building a 93 mauser action (haven't done one of these in a while) and I need some custom length action screws. Does anyone out there remember the thread pattern. If I have the numbers I can cut them on my lathe. They are about 1/4 X 22tpi but thats just a guess. Please someone post the correct thread pattern so I can do it right.
Dave
davecharles is offline  
Old May 19, 2010, 06:14 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,962
Your guess is correct, or as close as you can get.

Jim
__________________
Jim K
James K is offline  
Old May 20, 2010, 08:02 PM   #3
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 3,161
The bottom metal will not work right for feeding if the longer or shorter screws are needed.
Clark is online now  
Old May 20, 2010, 08:08 PM   #4
davecharles
Member
 
Join Date: January 3, 2010
Location: Carbondale
Posts: 60
Thanks guys, I will try the 1/4 x 22 and see how it goes. No worries about the bottom metal. Not using it anyway. Totally custom application. May post some pictures later.
Dave
davecharles is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06251 seconds with 9 queries