The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old November 21, 2000, 03:00 PM   #1
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
Harley or Rich, could you tell me about my FAL's history? What info do you need for your research? I'll check for your response on this tonight, and then give you the info you need.
Steve Smith is offline  
Old November 21, 2000, 06:59 PM   #2
Harley Nolden
Staff In Memoriam
 
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
FAL History

Can't say what I don't know. Need info.

HJN
Harley Nolden is offline  
Old November 21, 2000, 07:17 PM   #3
hksigwalther
Senior Member
 
Join Date: November 18, 1998
Location: NE OH, USA
Posts: 3,198
FAL

Try :
http://fnfal.com/falfiles/faq.html
__________________
- Ron V.
hksigwalther is offline  
Old November 22, 2000, 12:22 AM   #4
Daniel Watters
Senior Member
 
Join Date: February 7, 1999
Location: USA
Posts: 644
Don't forget the wonderful FAL reference book from Collector Grade Publications.
Daniel Watters is offline  
Old November 22, 2000, 10:32 AM   #5
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,986
Probably can't give you the exact history as the FAL was used by something like 93 coutries as their official battle rifle. It and the HK G3 armed most of the free world for something like 30 years. It can still be found in some locales.
The FAL series of rifles falls basically into three groupings. The original military rifles (FN mfg'd and licensee), there were many, many variants as FN would do most anything reasonable to obtain a contract. Some variants would include full-auto or semi-auto, wood or synthetic furniture, barrel weights and lengths, metric, inch or Israeli style etc. Original FN and Browning (USA importer) FALs usually start at around $4k and all USA-legal FALs are grandfathered in as the BATF considers these as Title II firearms.
The second grouping would be newly manufactured FALs. This grouping would include DSA (www.dsarms.com), Entreprise (www.entreprise.com) and Hesse (www.hessearms.com). DSA has a sterling reputation in the FAL community while the others don't. DSAs start at around $1300 and the others start at a lower price (don't know offhand).
The third grouping is the kit rifles. These are rifles or carbines built on Imbel, Hesse, or Entreprise receivers. Fully built rifles start at around $600. This class generally includes the Century Arms rifles, gunsmith-built rifles and do-it-yourself parts kits. The best receiver by far is the Imbel. It is a Brazillian receiver made on FN-licensed machinery. The parts kits that you see advertised are all ex-military rifles that have been broken-down into parts, less receiver, for importation.
The only way to tell any sort of history of your FAL is if you have a scarce Browning import (G series or GL series FAL). Most likely yours is a kit as that is the majority of FALs out there. One clue is if it's an Israeli style then it was used in...Israel. Watch out for the Ishapore FALs. They were reverse engineered when India was too cheap to purchase an FN license. These parts don't really fit on any other FALs.
Well, that is about as concise as I can get it. If you have any questions, fire away or go over to falfiles(url posted above).
fal308 is offline  
Old November 22, 2000, 02:37 PM   #6
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
Ok, so I didn't get back to the 'puter last night sorry!

Harley, I didn't mean that I wanted you to research my rifle w/o info about it...sorry about the mis-understanding. Basically, I need you to tell me what to tell you so you can tell me about it. Got it?

I'll try that again...I don't know what items "identify" my rifle (actually butstock group and everything from the receiver forward)...the receiver is Entreprise. So, what markings do you need?

BTW, I've tried this over at FNFAL files...no one even gave it a try...those guys are mre interested in furniture than where their rifle's been.
Steve Smith is offline  
Old November 22, 2000, 09:24 PM   #7
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
OK, I've got some markings, now. sorry about the wait.

I'll tell you what I can...I hope it's the right info.

BTW, it's an STG-58 if I haven't already said that.

The buttstock assy has only twp sets of markings. One set, for the safety, is marked S (safe), E (fire), and a D shaped letter (full auto). Also, there's a number just over the E, which is 159244.

For the business end, under the left handguard, on the barrel is this:

Kal 7.62 m/m *H and then an egg shaped thing with a crown on it. Inside the egg, the letters ELG and a star under the letters.

Under the right handguard, a number E13613 has been striken out, and under it the number 82752 has been stamped.

Thanks in advance for the help.
Steve Smith is offline  
Old November 22, 2000, 09:36 PM   #8
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 17,072
Hey fal308!

How much is one of the Brazilian made Springfield FN-FALs going for NIB? Thanks Barclay,

Gary
4V50 Gary is offline  
Old November 24, 2000, 09:27 AM   #9
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,986
Gary,
Don't think I've even seen one for sale in the last year or so but as I recall, the last one I did see was over 2k. Didn't get to Knob Creek this past fall so couldn't check out the latest pricing (pricing is usually a little higher at the Creek but it is available then and there). There is a price difference between the early ones and the later ones. Can't recall offhand what the difference is between them though. If it's anywhere near a deal, you might want to grab it while you can.

Steve,
Yours, I believe, is a kit gun using an Entreprise receiver. Probably an older Entreprise receiver at that. IIRC newer Entreprises don't even have a provision for FA. Did you buy it new or used? If you bought it new recently it should already have the USA-legal parts in it. The easiest way to tell is usually by the cocking knob. Is it an aluminuim knob? That is a USA-legal part. If it has one of the original cocking handles then most likely the other parts are also original surplus parts also. The StG-58 is the Austrian version of the FAL. They are considered the best parts kits around usually. Many people don't like the handguards though , what with the bipod and the excess weight of the metal guards. The StG-58 is a metric assembly so parts should be relatively easy to acquire. Where the buttstock meets the receiver it should also be a straight vertical matchup. That would mean that your lower receiver is also metric. If there is a hump on the bottom part of the vertical then you have an inch lower receiver. Not too much of a problem but remember while receiver groups can be interchanged (metric lower on an inch upper etc) individual parts within the receivers cannot be interchanged (metric pistolgrip on inch receiver etc).
The markings on the barrel are the caliber markings and the proof markings. The ELG etc is a Belgian proof marking, confirming that the barrel is Belgian manufactured. (IIRC all StG-58s were Belgian manufactured). Don't recall offhand but I believe the markings near the selector lever are only assembly numbers.
Let us know if you have any other specific questions.
fal308 is offline  
Old November 26, 2000, 07:13 PM   #10
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
Update

Thanks, guys for the info, but I actually knew all of that already. I'm looking for the history of my particular FAL, not technicalities and legalities of it. In a previous post I listed the scroll marks...if anyone knows how to trace these so I can find it's history, it would be greatly appreciated.
Steve Smith is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08512 seconds with 9 queries