The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 22, 2000, 10:13 PM   #1
Charmedlyfe
Junior member
 
Join Date: October 11, 2000
Location: SC
Posts: 799
I'm working on a project- a 45-70 tactical rifle to be supressed. I'm looking for 500-yard range, and a 400-500 grain bullet. Any help on loads? It's a bolt-action (Mauser 98/Siamese blend)with maybe a 20 to 26" barrel, based on what is shortest with best velocity.
Charmedlyfe is offline  
Old November 22, 2000, 11:33 PM   #2
Gewehr98
Senior Member
 
Join Date: June 30, 2000
Location: Token Creek, WI
Posts: 4,068
George, please fill me in on your Siamese Mauser .45-70 project, I've got a Siamese action that is sitting in a drawer waiting for the right smith to build it into a .45-70, but those guys are getting fewer and farther between. I had in mind a Mannlicher-stocked variant, with octagon barrel, browned, not blued, with one of those vintage brass scopes ala' Navy Arms, sort of a "what-if" turn-of the century .45-70 bolt rifle. I've already made up loads for it, with a 405gr cast flat-point bullet, bought a ton of new Remington Nickel brass, and there the project stalled...
Gewehr98 is offline  
Old November 23, 2000, 09:28 AM   #3
Charmedlyfe
Junior member
 
Join Date: October 11, 2000
Location: SC
Posts: 799
My favorite 'smith (and a good friend) did some research when I was planning this beastie, and found that the only Siamese parts you really need are the bolt and triggerguard. So, we're using a VZ24 receiver with those Siamese parts. Also, makes cutting the barrel threads easier. The guy is a genius when it comes to Mausers specifically, and rifles generally. I've got a VZ24 in 308 that we built, and it shoots 1/2moa all day long.

I thought that, since the 45-70 is such a slow mover already, subsonic would just be a short step. A 500gr. bullet would be durn near impervious to wind, I'd just need enough elevation. Further, I could also shoot 45-70 Ruger loads if I so chose.
Charmedlyfe is offline  
Old November 23, 2000, 08:18 PM   #4
beemerb
Junior member
 
Join Date: October 2, 1999
Location: AZ
Posts: 1,759
COuldn't you start with the loads for the trap door springfields?They only moved out at about 1350 with a 405 grain bullet.Shouldn't be hard to just download a little bit from there to get subsonic.
Just an idea.
My Complete guide to handloading by Sharpe gives a couple loads that might work for you.
405gr lead unique 11.0 1133
405gr lead unique 17.3 1472

500gr lead unique 11.0 1020
500gr lead unique 17.2 1330


All the rest of the loads use powder no longer made.
Hope this helps
beemerb is offline  
Old November 24, 2000, 10:58 PM   #5
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 2,828
http://www.recguns.com/VIIE7.html

The above url leads to a piece on 2 gr. of Bullseye behind a button bullet.
http://members.aol.com/lishsu/longgun.html
The above url sells the 155 gr. 45/70 bullet.

With my very short barreled 45/70, subsonic gas behind bullet is at about 1/2 gr. Bullseye, and I use a .457" soft lead ball, that wieghs about 150 gr.

If you have a supressor, then I guess you don't care about keeping the gas subsonic, that is the surpressor's job.
Clark is offline  
Old November 25, 2000, 12:59 PM   #6
Long Path
Senior Member
 
Join Date: May 31, 1999
Location: N. Texas
Posts: 5,888
Makes me wanna go out and buy an NEF Handy Rifle and a Marlin Guide Gun both in .45-70, and start load development!!
(sigh)

On a cop's salary? I'm looking at Christmas.

L.P.
Long Path is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07073 seconds with 9 queries