The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 20, 2010, 07:02 PM   #1
Resbum99
Junior Member
 
Join Date: April 17, 2010
Location: Washington State
Posts: 3
Land Groove Dimensions?

I know I'm probably asking a question that's been asked many times before. I also know there's no generic answer. I just need a rough ballpark figure.

Could someone tell me the ID difference between the lands and grooves to a general measurement of what to expect in a 22 Hornet Rifle?

Or, depending how you look at it: The height of the lands or depth of the grooves.

Thanks in advance.

Resbum99
Resbum99 is offline  
Old April 20, 2010, 07:20 PM   #2
Brandy
Junior member
 
Join Date: March 31, 2010
Posts: 151
Depends on the rifle, especially a Hornet

as they have been around so long. Some are .223 some .224 to start with.
Slug the bore and get a real good set of OD and depth mikes to answer your question. (The reason for which is a mystery to me)
Brandy is offline  
Old April 20, 2010, 07:45 PM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,530
Typically, US-made barrels use a .219" bore diameter with .224" groove diameter. European-made barrels use a .218" bore with .224" groove diameter.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old April 20, 2010, 08:14 PM   #4
Resbum99
Junior Member
 
Join Date: April 17, 2010
Location: Washington State
Posts: 3
Thank you Brandy and Scorch. That's exactly what I needed to know. Much appreciated.

Resbum99
Resbum99 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06402 seconds with 9 queries