The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 12, 2010, 11:56 AM   #1
rick35ovi
Member
 
Join Date: February 24, 2006
Location: wilds of Ohio
Posts: 30
another mini 14 problem

A friend of mine has a mini 14 with a unique problem, after he fires around 65 to 70 round the bolt locks up! it wont move forward or backwards and is about a half inch away from fully closing. Now here is the kicker, after the rifle sits for a while he is able to move the bolt by hand with no problem, it's like the rifle is overheating and locking up but at the range he is shooting at he is not allowed to fire as fast as he wants to, there has to be a noticeble pause between each round fired. That being the case, i wouldn't think the rifle would get too hot to fire, especially after only 60 or 70 rds, It acts like something is overheating and warping causing it to lock up but i just don't think thats tha problem, Any thoughts?
rick35ovi is offline  
Old April 13, 2010, 12:25 PM   #2
Mac's!
Senior Member
 
Join Date: August 15, 2001
Posts: 129
The first thing I would check is the gas syetm. The Mini-14 has an operating rod that slides over the gas tube as it's going into battery. Just before the bolt closes all of the way, the gas "plug" slides into the hole/port at the front of the rod. (Charging handle rod) I would check that for damage or crud buildup.

To eliminate any issues with the trigger unit, as soon as it locks up, remove the trigger unit. If that frees it up, look there for problems. You can also narrow down the problem by checking if the operating rod/charging handle has any forward and/or rearward play. In other words: If the bolt is locked up for some reason, you will be able to move the charging handle forward/rearward a small amount. If the charging handle is solid with no forward/rearward movement, see the first part of this post. Keep yer powder dry, Mac.
Tuff-Gun Finishes. The Name Says It All.
Mac's Shootin' Irons
http://www.shootiniron.com
Mac's! is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06181 seconds with 9 queries