The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old March 1, 2010, 02:38 PM   #1
skydog1979
Member
 
Join Date: February 21, 2010
Posts: 32
Concealed holster for sig sauer 232

I have a sig sauer 232, and I am looking to purchase a concealed holster for the gun. I would love to hear some suggestions. There seems to be so much out there, I am a little lost in trying to find the right holster. Thanks for your suggestions.
skydog1979 is offline  
Old March 1, 2010, 02:43 PM   #2
The Great Mahoo
Senior Member
 
Join Date: June 3, 2008
Location: Pennsylvania, USA
Posts: 1,268
While I can't speak to the Sig 232 specifically, I am very pleased with my holster from K&D Leather. I have one of their tuckable IWB Dakota Defenders, which is no longer offered, but it is absolutley terrific, and one of the most comfortable holsters I have owned.

I also like some of the simple ones from Bianchi and Galco, which are typically readily available without a wait time.


What style are you looking for? IWB, OWB, Shoulder? W/ or w/o added retention strap? Planned position for carry?
__________________
“There are three reasons to own a gun. To protect yourself and your family, to hunt dangerous and delicious animals, and to keep the King of England out of your face.” - Krusty the Clown
The Great Mahoo is offline  
Old March 1, 2010, 02:55 PM   #3
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,350
Check reviews on the Crossbreed Supertuck. I have one and I love it. Never seen a bad review.
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old March 1, 2010, 06:56 PM   #4
AK103K
Senior Member
 
Join Date: May 1, 2001
Location: PA -- In the shadow of the Shade
Posts: 7,777
What type of holster are you looking for?

I have a couple of P230's, and use either a Blade Tech IWB, or a Galco Executive shoulder holster, which is my favorite by far. I'm not a real fan of shoulder holsters, but this one is very different than most.

I also have a Galco ankle holster, which works well, but if I were to do it again, I'd go with Desantis. I have one of their ankle holsters for my 60/642, and its a lot more comfortable than the Galco.

You may also want to look into Smart Carry. I also have one of these, and with the right pants, it works very well, and is very comfortable. For me though, the P230 is really about as big as I want to go gun wise with this holster.
__________________
“The enemy is anybody who's going to get you killed, no matter which side he is on.”
― Joseph Heller, Catch-22

Zeitgeist - The Movie
AK103K is offline  
Old March 2, 2010, 10:22 AM   #5
skydog1979
Member
 
Join Date: February 21, 2010
Posts: 32
Thanks. I was thinking about IWB setup.
skydog1979 is offline  
Old March 2, 2010, 11:02 AM   #6
AK103K
Senior Member
 
Join Date: May 1, 2001
Location: PA -- In the shadow of the Shade
Posts: 7,777
The Blade Tech holsters work well with that type carry, and are about half of what youd pay for a good leather holster, and will long outlast one. They are made of kydex, and may tend to wear the finish at one or two points more noticeably than leather, which tends to wear the finish more over all. You dont have the rust issue with kydex, like you do with leather.
__________________
“The enemy is anybody who's going to get you killed, no matter which side he is on.”
― Joseph Heller, Catch-22

Zeitgeist - The Movie
AK103K is offline  
Old March 2, 2010, 11:52 AM   #7
RichC
Member
 
Join Date: April 30, 2009
Posts: 85
I use a Milt Sparks IWB holster with a Sig 232 and love it.

http://www.miltsparks.com/
RichC is offline  
Old March 4, 2010, 07:21 PM   #8
rsxr22
Senior Member
 
Join Date: January 24, 2009
Location: Youngstown, OH
Posts: 1,825
i like crossbreed and comp-tac mtacs alot, but for a cheaper holster that does the trick, check out the don hume
rsxr22 is offline  
Old March 4, 2010, 07:29 PM   #9
alloy
Senior Member
 
Join Date: September 11, 2008
Posts: 1,931
The most comfortable I found is Desantis cozy partner which they only list as fitting a Walther PPK type handgun.
The ejection port blocking is off a teeny bit for the Sig but it works perfectly regardless and I alternate it for either handgun.
__________________
Quote:
The uncomfortable question common to all who have had revolutionary changes imposed on them: are we now to accept what was done to us just because it was done?
Angelo Codevilla
alloy is offline  
Old March 10, 2010, 09:57 AM   #10
K-Man
Member
 
Join Date: June 18, 2005
Posts: 60
We'll still make the Dakota Defender if you ask for it. We just do not have it advertised on our website.

Also, I have an OWB, clip on the belt, holster on hand for the P232. It's a right hand version, and black in color. It's fully covered in genuine alligator. The price is $80 + shipping.
__________________
www.kdholsters.com

U.S. Navy (Retired)

May we always have the freedom to pursue our dreams.
K-Man is offline  
Old March 13, 2010, 02:59 PM   #11
Mallard76
Member
 
Join Date: November 22, 2008
Posts: 41
232

I carry mine in a Don Hume IWB holster.
Mallard76 is offline  
Old March 24, 2010, 12:25 AM   #12
kmc_XD40
Junior Member
 
Join Date: March 24, 2010
Posts: 3
I got a universal CCW holster from a gun show recently and it has been the best $25 I've spent. it came with a metal clip but I use the belt loop, it fits both my XD40 and Kimber 1911 (depending on if I'm at the range or for everyday use) this link is for an e-bay sale for the same thing I got - here
kmc_XD40 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08892 seconds with 9 queries