The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 16, 2010, 11:09 AM   #1
shakes
Member
 
Join Date: February 13, 2010
Location: wisconsin
Posts: 31
ruger 10/22 receiver finish

I recently was trying to clean up a couple little rust spots on my 10/22. By the time i was starting to get it somewhat cleaned up (wasn't even bad just bugged me) the bluing was starting to come off. No big deal time to learn how to blue a rifle i figured. So i got out the sandpaper and bought a bluing kit. Figured i may as well do the receiver as well.... Now i understand that bluing is oxidization related.(Aluminum receiver) Barrel looks terrific but what do i do with the receiver? Do i have to paint it, or is there a better way to do it? Thought about polishing it out but then it would be chrome reciever black scope, barrel, trigger, green laminate thumb hole stock. It would look bad. Thanks in advance
shakes is offline  
Old February 16, 2010, 12:05 PM   #2
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,752
Refinishing Cast Aluminum Parts

There is a great actical in the lastest issue of GUNS magazine that covers this pretty well and what your optins might be. Reference page 22 in the April 2010 issue. They mentions the the latest and greatest product is Black-T and RhinoHide and list vendor or service information ...

Be Safe !!!
Pahoo is offline  
Old February 16, 2010, 12:08 PM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,533
When in doubt, go to Brownells'.
http://www.brownells.com/.aspx/pid=1...A_HYDE_reg__II
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old February 20, 2010, 11:27 PM   #4
shakes
Member
 
Join Date: February 13, 2010
Location: wisconsin
Posts: 31
I ended up just painting it with some rustoleum. It turned out ok for now, actually it looks great, but it may go bad fast. If it does I will probably go with duracoat since they are about ten miles from my house. Blued the barrel and it turned out fantastic. Thanks for the advice on the receiver i researched it. But painting was faster for me, for now.
Attached Images
File Type: jpg S4200002.jpg (232.0 KB, 72 views)
File Type: jpg S4200030.jpg (63.8 KB, 58 views)
shakes is offline  
Old February 21, 2010, 06:23 AM   #5
radom
Senior Member
 
Join Date: January 21, 2000
Posts: 1,298
I would just sand the thing and then fuff it a bit and go with the stainless look.
radom is offline  
Old March 5, 2010, 01:33 PM   #6
chubbus
Junior Member
 
Join Date: March 4, 2010
Location: U,K
Posts: 1
Receiver finnish.

Hi all.
I have glass bead blasted ally parts and receivers and the finnish is quite good and unusual.If you know of anyone with a blasting cabinate and some glass bead get him to do a small piece off ally for you to see the finnish.

Hope this helps. Chubbs.
chubbus is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08562 seconds with 10 queries