The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 2, 2010, 03:42 PM   #1
waterfowler
Senior Member
 
Join Date: January 31, 2010
Posts: 115
Glass bedding an sks

Can you glass bed an sks? I've got a syntheitc stock. Will the epoxy stick to it? What are your thoughts? Any suggestions on kits I can order? Thanks.
waterfowler is offline  
Old February 2, 2010, 03:48 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,532
Never heard of anyone glass bedding an SKS. I am sure it can be done, but why? And no, the glass probably will not stick to the plastic stock.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old February 2, 2010, 10:18 PM   #3
guncrank
Senior Member
 
Join Date: July 15, 2006
Location: Fern Creek ,KY and Metro Louisville at large
Posts: 319
Yes can be done butwill needed to degrease stock to remove mold releaseabd rough alot for glass to stick
__________________
CW Shooters Supply Inc
1-866-217-5990
Machine Shop and Finishing Services to the trade and public
guncrank is offline  
Old February 3, 2010, 05:24 PM   #4
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,460
Depends on the plastic. If it's some kind of polyolefin thermoplastic, like polyethylene, it will be like trying to get glue to stick to wax. If it's got fibers in it, then degreasing and roughing it up enough may solve the problem?

You can also try a two-part rubber bedding. That's used by some manufacturers. Devcon's Flexane 80 is an example. The flexible material may adhere better.

If your SKS is like mine, then the accuracy limitations likely have more to do with how the barrel attaches to the action and the gas system than the stock. I wouldn't be surprised if any improvement bedding made were invisible because of those other factors.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member

Last edited by Unclenick; February 4, 2010 at 02:51 PM. Reason: Completed product name
Unclenick is offline  
Old February 3, 2010, 06:44 PM   #5
94Girl
Member
 
Join Date: January 19, 2010
Location: NC (for now)
Posts: 35
As said above, you won't get any noticable change in accuracy. The design of the rifle isn't going to benefit you from glass bedding. And depending on the glass bedding used and stock prep, will depend on what might stick to the poly stock, I doubt you would get anything to stick that wouldn't come loose when the gun was fired.

If you want to glass bed something that will give you some experience and be fun and also make you a great cheap rifle, buy yourself a surplus Mauser.


If you just HAVE to glass bed a SKS, pick up a surplus wood stock,

KITS??? Brownells Accura Glass

good luck and have fun........
94Girl is offline  
Old February 3, 2010, 09:46 PM   #6
Slopemeno
Senior Member
 
Join Date: January 19, 2007
Posts: 2,376
I'd take a look at the instructions for bedding an M-1/M-1A or M-14, and go from there. How much advantage you'll gain is debateable, but the SKS has decent accuray out of the box. Do a trigger job while you're in there too.
Slopemeno is offline  
Old February 4, 2010, 03:34 PM   #7
waterfowler
Senior Member
 
Join Date: January 31, 2010
Posts: 115
My main problem that I have with my stock is the barrell assembly does not sit secure in the stock. There is a little play, i'd guess five thousandths. I thought glass bedding would help the barrell stay in place. Thanks for all of your help.
waterfowler is offline  
Old February 4, 2010, 05:36 PM   #8
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,383
Glass bedding would help with that, but for that little amount of play, a bit of urethane rubber coating might do the trick. The kind of stuff they sell in small bottles to dip tool handles in.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old February 9, 2010, 01:44 PM   #9
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 3,160
I have glassed an SKS, drilled and tapped for scope, trigger job, careful handloads, increased the length of pull for a full sized man, and operated manually instead of semi auto.

There are web sites with pictures.

I was never able to get AR15 accuracy.
Clark is online now  
Old February 11, 2010, 10:09 AM   #10
edward5759
Senior Member
 
Join Date: September 15, 2009
Location: Phoenix, AZ. 30 miles from water, two feet from Hell.
Posts: 354
SKS

All kinds of make up on the pig. You’ll still have a pig.
RTV woks good, but is not as long lasting as epoxy
RTV is a little forgiving as well.
It should tighten up the barrel a little but if you make it ridged and you drop it, it will crack.
I say keep it the way it is and have FUN with it.
Ed
edward5759 is offline  
Old February 16, 2010, 03:35 PM   #11
waterfowler
Senior Member
 
Join Date: January 31, 2010
Posts: 115
Thanks for all yor help
waterfowler is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08060 seconds with 9 queries