My new SearsRoebuck auto loaader

grubbylabs · February 4, 2010, 09:28 PM

So how do you like my new to me 12g auto loader I traded a set of truck air bags and 50 bucks for it. It seems to shoot good. Any one know any thing about the adjustable choke on it?

zippy13 · February 4, 2010, 11:56 PM

it looks like a Standard Poly-Choke, or the Sears version of one.

Patriot USA · February 5, 2010, 12:13 AM

Sounds like you may have a Ted Williams 300, made by Winchester; same as a Winchester 1400.

To set the choke correctly, screw it all the way down. It should stop just beyond Full; then back it off to what setting you want. You should feel clicks. It doesn't have all the settings printed on it. The click between IC and MOd would be Skeet 2; The click inbetween Mod and Full would be Improved Modified. It can be also unscrewed all the way off for cleaning.

Good guns. I had a TW 200 (Winchester 1200) the pump version. I shot that gun really well. Grandson inlaw has it now.

grubbylabs · February 5, 2010, 12:41 AM

I did some looking around and it was made for sears by Hi standard it is a model 66

zippy13 · February 5, 2010, 01:20 AM

I had a Sears by Hi-Standard and it's choke was set just as described, above.

Greetings Patriot USA, and welcome aboard.

grubbylabs · February 5, 2010, 01:22 AM

OH yes greetings Patriot and welcome to the forum, Sorry I did not see that you were new before. Hope you like it here.

Chaz88 · February 5, 2010, 01:41 AM

looks like a good shot gun but I think you should swap that filter on the fish tank out for a canister.

grubbylabs · February 5, 2010, 04:11 PM

Whats wrong with my filter?

you can still see from one end of the tank to the other.

ebutler462 · February 5, 2010, 06:32 PM

Sears used an adjustable choke made by Lyman. It is a very good device.

zippy13 · February 5, 2010, 06:52 PM

ebutler462,
Do you recall, does the Lyman have the same basic instruction: Tighten all the way and first click back is full?

ebutler462 · February 7, 2010, 05:06 PM

Same!

February 5, 2010, 12:13 AM	#3
Patriot USA Junior Member Join Date: February 5, 2010 Posts: 1	Sounds like you may have a Ted Williams 300, made by Winchester; same as a Winchester 1400. To set the choke correctly, screw it all the way down. It should stop just beyond Full; then back it off to what setting you want. You should feel clicks. It doesn't have all the settings printed on it. The click between IC and MOd would be Skeet 2; The click inbetween Mod and Full would be Improved Modified. It can be also unscrewed all the way off for cleaning. Good guns. I had a TW 200 (Winchester 1200) the pump version. I shot that gun really well. Grandson inlaw has it now. Last edited by Patriot USA; February 5, 2010 at 12:15 AM. Reason: addition

February 5, 2010, 01:41 AM	#7
Chaz88 Senior Member Join Date: January 5, 2010 Posts: 630	looks like a good shot gun but I think you should swap that filter on the fish tank out for a canister. __________________ Seams like once we the people give what, at the time, seams like a reasonable inch and "they" take the unreasonable mile we can only get that mile back one inch at a time. No spelun and grammar is not my specialty. So please don't hurt my sensitive little feelings by teasing me about it.

February 4, 2010, 11:56 PM	#2
zippy13 Senior Member Join Date: August 23, 2008 Location: SoCal Posts: 6,281	it looks like a Standard Poly-Choke, or the Sears version of one.

February 5, 2010, 12:41 AM	#4
grubbylabs Senior Member Join Date: October 11, 2009 Location: Hansen Idaho Posts: 1,366	I did some looking around and it was made for sears by Hi standard it is a model 66

February 5, 2010, 01:20 AM	#5
zippy13 Senior Member Join Date: August 23, 2008 Location: SoCal Posts: 6,281	I had a Sears by Hi-Standard and it's choke was set just as described, above. Greetings Patriot USA, and welcome aboard.

February 5, 2010, 01:22 AM	#6
grubbylabs Senior Member Join Date: October 11, 2009 Location: Hansen Idaho Posts: 1,366	OH yes greetings Patriot and welcome to the forum, Sorry I did not see that you were new before. Hope you like it here.

February 5, 2010, 04:11 PM	#8
grubbylabs Senior Member Join Date: October 11, 2009 Location: Hansen Idaho Posts: 1,366	Whats wrong with my filter? you can still see from one end of the tank to the other.

February 5, 2010, 06:32 PM	#9
ebutler462 Senior Member Join Date: March 16, 2007 Location: NC Posts: 437	Sears used an adjustable choke made by Lyman. It is a very good device.

February 5, 2010, 06:52 PM	#10
zippy13 Senior Member Join Date: August 23, 2008 Location: SoCal Posts: 6,281	ebutler462, Do you recall, does the Lyman have the same basic instruction: Tighten all the way and first click back is full?

February 7, 2010, 05:06 PM	#11
ebutler462 Senior Member Join Date: March 16, 2007 Location: NC Posts: 437	Same!