The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 2, 2010, 03:27 PM   #1
KySilverado
Senior Member
 
Join Date: January 24, 2010
Posts: 147
Stock-Forearm Fitting

Well I'm a sucker for abuse. I've not done much wood work on any of my firearms but have decided to tackle getting some new wood onto one of my 1885 Winchesters.

My question has to do with the ebony insert. I am assuming it is glued in place? If so what type of glue?

TIA for any input





KySilverado is offline  
Old February 2, 2010, 03:33 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,429
I just use epoxy and clamp it well. I usually use AcraGlass, but any good quality epoxy will hold it in place.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old February 2, 2010, 03:38 PM   #3
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,545
There are just as many choices on wood glue as there is oil for metal. Yes, this has to be glued and "Lately" I have been using Tite-Bond III. It works kind like elmers but it's waterproof. You might also go to this sight and see all they provide. The poly glues like Gorilla are good but messy and you have to keep an eye on them as they bubble up and make a mess. Recentlly had a buttstock and forend to repair. On the fresh cracks, i used the Tite-Bond-III and on the older and dirtier cracks, I used the Gorilla. You have an outstanding project there. ..


http://woodworker.com/


Be Safe !!!
Pahoo is offline  
Old February 2, 2010, 03:40 PM   #4
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,545
Duplicate, please delete ...
Pahoo is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06456 seconds with 9 queries