The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Thread Tools Search this Thread
Old January 8, 2010, 11:25 PM   #1
Join Date: November 24, 2009
Location: SE
Posts: 36
Weaver Scope Repair

My father, who was a shooter all his life, passed away not long ago. As I have cleaned up and gone through the boxes of reloading gear, gadgets etc, I have come up with about a dozen of his old Weaver target and hunting scopes that he had put away at one point or another. Most of them are fixed power but there a couple of variables, most are about as old as I am I suppose. I have always pretty much been a Leupold man but have had some steel tube Weavers like these and they performed very satisfactorily.
All of Dad's scopes are all blue steel with 1 inch tubes except for one of them. About half of them are foggy and need to be serviced or tossed. I would like to put them on some of my rifles and would like to be able to use them again.

Where can I send these scopes and be assured that I will get timely repair service so that I can get these scopes back into service within a reasonable time period ? Thanks.
Parabuteo is offline  
Old January 9, 2010, 09:23 AM   #2
Senior Member
Join Date: February 2, 2007
Location: Iowa
Posts: 2,676
Go over to the forums at There is a guy there that is retired from the old Weaver USA plant where the scopes were made. Sorry, can't remember his name but he is a Weaver Scope God. Just join, start a thread about your weaver scopes and he'll be along.

L_Killkenny is offline  
Old January 9, 2010, 11:03 AM   #3
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,881
If you check evil bay you well find a large market for old Weaver scopes. You well find they are bringing pretty good money, even when in need of repair. You may be setting on a gold mine.
madcratebuilder is offline  
Old January 9, 2010, 12:23 PM   #4
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 5,925
Ironsight Scope Repair

Here ya go!
taylorce1 is offline  
Old January 10, 2010, 12:30 PM   #5
Join Date: November 24, 2009
Location: SE
Posts: 36
Weaver Scope Repair

Thank you Gents! If there are any other folks who might have any info concerning getting these scopes put back into shooting order I would sure appreciate the direction. Thanks again.
Parabuteo is offline  
Old January 10, 2010, 03:47 PM   #6
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 11,866
FWIW, while the old Weaver scopes are a bit of Americana and lend that old nostalgia look to older rifles, the optical quality of scopes from the 1950s and 60s leaves a lot to be desired. Even a relatively cheap scope made nowadays has better optical quality than some of the average quality rifle scopes from that era (I know someone is going to chime in any second and tell me about the amazing clarity of his 1930s era Zeiss, Bausch & Lomb, Groenlander, or Unertl, but those are top-notch scopes).

Also, while it may sound cool to use an old scope your Dad used, many of those scopes' crosshairs were made from spiderweb (really!) or silk, and as such they are relatively fragile, and are irreplaceable if damaged. Metal crosshairs were a late 1960s to 1970s innovation. If you do have the scopes serviced, use them on a period-correct rifle restoration and avoid shooting the rifle very much.
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old January 11, 2010, 06:01 PM   #7
Join Date: November 24, 2009
Location: SE
Posts: 36
Weaver Scope Repair

Thanks, those are good points to consider. I'm not short on Leupolds etc. or other rifles of periods way before and after Dad started shooting to current production. I'll have to think all this over a bit. I'd hate to invest in restoring them just to have them sit around from now on. Take care.
Parabuteo is offline  
Old January 26, 2010, 03:20 AM   #8
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 4,966
redfield rebuild

Dunno about Weavers, but the ironsight people rebuilt a usa redfield/widefield 4x for me 5-6 years ago maybemore ,and its been doing fine.

Seems like the guy was a retired trooper or something..
I had a question and the owner came on the line w/ me.........!!!!!
bamaranger is offline  
Old January 26, 2010, 12:15 PM   #9
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 6,269
Good morning Parabuteo
As stated, an old Weaver on and older lever action, is a great match. In fact, I would not put anthing else on my Marlin - 39A. There are guys out there that love to collect these. I have about six of these old kids and they are just neat to have. There was a time you could buy a basket full for around $25.00 each but not anymore. My guess is that they are worth fixing up.

Be Safe !!!
Pahoo is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06714 seconds with 9 queries