The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old November 14, 2009, 01:42 AM   #1
tony mcdonald
Junior Member
 
Join Date: November 14, 2009
Posts: 4
m24/47 yugo mauser-8mm advice needed

new guy requests permission to come aboard. just got a yugo m24/47 from j and g sales and a case of 8mm ammo, old, corrosive type, but clean in the sealed tin. First round does not go boom, so I chucked it, then none of them worked until I recocked usually 2 or 3 times. I cleaned the bolt and reciever with hoppes #9 to remove the heavy grease and swabbed the bore. I cound not figure how to remove the bolt and dissemble it. Is the gunk in the bolt body retarding the firing pin, sure looks like a light firing pin strike. How does a guy get the bolt out and taken apart? this is a cool rifle, old but with lots of character and a good feel, good cartridge too. Thanks for any help.
tony mcdonald is offline  
Old November 14, 2009, 01:55 AM   #2
emcon5
Senior Member
 
Join Date: July 10, 1999
Location: High Desert NV
Posts: 1,681
Here you go:

http://www.surplusrifle.com/shooting...mbly/index.asp

And a video:

http://www.milsurps.com/showthread.php?t=15970
emcon5 is offline  
Old November 14, 2009, 03:22 AM   #3
tater134
Senior Member
 
Join Date: August 22, 2009
Location: NE,PA
Posts: 390
What type of ammo was it that you were shooting?I know the 50's yugo ammo had very hard primers and required 2 strikes to go off in some of my 8mm rifles.
tater134 is offline  
Old November 14, 2009, 08:49 AM   #4
5whiskey
Senior Member
 
Join Date: October 23, 2005
Location: US
Posts: 1,576
Yeah, emcon put you on the right direction. Disassembling the bolt to get all of the cosmo out is pretty important. If it's too gummed up you could possibly break the firing pin. If it does break, the only way to get a replacement these days is to buy a firing pin for a K98 and have someone to fabricate it to fit the shorter yugo bolt.

That coupled with the fact that a lot of the surplus 8mm mauser ammo does indeed have hard primers.

One last thing, welcome aboard sir

Last edited by 5whiskey; November 14, 2009 at 09:06 AM.
5whiskey is offline  
Old November 14, 2009, 03:02 PM   #5
mp25ds4
Senior Member
 
Join Date: March 6, 2009
Posts: 392
buy a wolff 22 pound firing pin spring and that should fix the problem, i think they sell them on midwayusa.com
__________________
Liberal Newscaster Katie Couric, while interviewing a Marine sniper, asked:
'What do you feel.....when you shoot a Terrorist?'
The Marine shrugged and replied, "A Slight Recoil."
mp25ds4 is offline  
Old November 14, 2009, 08:09 PM   #6
tony mcdonald
Junior Member
 
Join Date: November 14, 2009
Posts: 4
thanks to all of you for the advice, surplus rifles had all I needed, spent the day taking the bolt apart, de-gummin it and going over each part with fine emery paper, just a light touch. Man, there looks like some machining in the fabrication of that bolt. Put her all back together and was 100% at the range. 80 rounds without a hiccup. Man is that cheap shooting. I saw those hard primers yesterday, some of those light strikes barely made a mark. That rifle just rocks, a real manly cartridge , consistant hits at 200 and even 400 yds. That is a bargain rifle with lots of class, and the feel that it will go to h*** and back.
tony mcdonald is offline  
Old November 14, 2009, 08:13 PM   #7
tony mcdonald
Junior Member
 
Join Date: November 14, 2009
Posts: 4
p.s the ammo was just exactly what you described -50's yugo hardball. really smacks the steel plates.
tony mcdonald is offline  
Old December 5, 2009, 04:56 PM   #8
Crazy Carl
Senior Member
 
Join Date: December 5, 2009
Location: Alamance Co., NC
Posts: 221
How was the bore/rifling & muzzle on that rifle? I've been kind of eye-balling them, myself.
Crazy Carl is offline  
Old December 5, 2009, 05:55 PM   #9
sonick808
Senior Member
 
Join Date: November 19, 2009
Location: Chandler, AZ
Posts: 396
that's going to be my second c&r purchase once i receive it

jg has some nice looking specimens

First c&r will be a ttc.... not sure who has those yet

ETA: hot damn, j&g has those too!

glad to see you are on track with your mauser. I will probably refer to this thread when I get mine also
sonick808 is offline  
Old December 12, 2009, 10:37 AM   #10
dean1818
Senior Member
 
Join Date: December 5, 2009
Location: Frisco Texas
Posts: 637
I have a 24/47 that I purchased for hunting, and have done the following:

1) 22 lb Wolff Spring
2) DEEP CLEANING of the bolt (BAKE it.... it will fully remove the cosmoline that it was holding, even a little bit in the works may keep the firing pin from fully engageing)
3) Purchased a "tallsight" because these rifles were sighted in at just over 200 Meters. (They shoot 12 - 20 inches high at 100 yards)

The tallsight needed to be filed down to the distance that you prefer.

After some good and bad days with the 50's yugo ammo, I switched completely and sighted the rifle to the Romanian 8MM

Many milsurplus fans that shoot the 50's ammo just shoot the bullet again.
(I quickly tired of that..... I have also heard of these bullets going off a few seconds later. A big problem if you have just ejected it)


Enjoy your rifle..... very fun to shoot
dean1818 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08840 seconds with 9 queries