The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old November 18, 2009, 04:42 PM   #1
Gregory Gauvin
Senior Member
 
Join Date: March 6, 2009
Posts: 199
AR-15 Roll Pin

I'm trying to locate the windage knob retaining roll pin for AR-15 rear sight. I believe this is .062" diameter, .375" length. I've tried searching many-a-place, and have even called technical staff, and yet, all they do is list or list duplicate roll pins for rear sight spring retaining pin. I already have this pin and is NOT the same size as the windage knob retaining pin. I do not want nor need to order a complete set of roll pins (and even many these kits leave out the windage knob retaining pin), however, the rear sight spring retaining pin once again seems pretty popular. I called my local hardware store. The smallest roll pins they have are 5/64th and 1/4" length. I am not going to drill out my windage knob.

If anyone can direct me to a link to where I can get the windage knob retaining pin I would highly appreciate it. If you should have spare parts laying around and come across one of these pins, I would gladly pay for it.

As I travel the websites in search of this part, I have come across rear sight kits that even leave this part out. I have a strong feeling that there are a lot of people in the gun industry that know little to nothing at all about guns. This makes me frustrated.


Clarification: So what I am seeing is the forward assist roll pin, windage knob roll pin, and rear sight spring roll pin labeled as "Rear sight spring pin - 3 required" with a part number. The problem is, all 3 of these pins are different dimensions. Of course, this is confusing, as 3 separate part numbers should be listed, but are not. So if all 3 roll pins are labeled the same, how will I know which one they will send me.

Last edited by Gregory Gauvin; November 18, 2009 at 05:21 PM.
Gregory Gauvin is offline  
Old November 18, 2009, 05:49 PM   #2
Gregory Gauvin
Senior Member
 
Join Date: March 6, 2009
Posts: 199
UPDATE: I spoke to another techy and did a little research on the roll pin dimensions. What they did (to make things real confusing) was use a duplicate part number for both the forward assist roll pin and rear sight base spring pin. To top it off, they do not disclose this on their website nor show a listing for the rear sight base spring pin, but only the forward assist roll pin (and it's part number) and a part number for the rear sight base spring pin (which, is really, the windage knob roll pin). But there is no "windage knob roll pin" listed on the sight, nor is the forward assist roll pin marked as duplicate rear sight base spring pin. Make sense to you?

DPMS
Gregory Gauvin is offline  
Old November 22, 2009, 12:59 PM   #3
Alleykat
Junior member
 
Join Date: July 26, 2007
Posts: 3,668
Don't suppose you tried the largest gun parts dealer in the World, by any chance??

http://www.brownells.com/.aspx/pid=2...NDAGE_KNOB_PIN
Alleykat is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06804 seconds with 9 queries