The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old October 1, 2009, 02:37 PM   #1
sdclaw
Member
 
Join Date: September 15, 2009
Posts: 22
Breneke KO's through a rifled barrel?

Anyone have any experience with these? They say on the box safe for smooth or rifled barrel. Anyone here agree or disagree? They are extremely cheap at my local gun shop ($4 a box) and I wanted to use them to play around with my new deer set up but would rather not deal with leading in the rifling.

Input please!!!
sdclaw is offline  
Old October 1, 2009, 05:03 PM   #2
Rigby1962
Senior Member
 
Join Date: June 26, 2007
Posts: 264
Brenneke says its safe, I would try them. One thing I have read about Brenneke is they take the slug business very seriously. Doesnt mean they are going to give you the best results from your gun though.
Rigby1962 is offline  
Old October 1, 2009, 06:03 PM   #3
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS (new to MS)
Posts: 4,660
I've been wanting to try those, but I'm having a hard time finding them. Nobody carrys them locally and the shipping charges would kill any economy.
Doyle is offline  
Old October 1, 2009, 06:43 PM   #4
jheitertusa
Senior Member
 
Join Date: March 19, 2002
Location: Indiana
Posts: 119
You can always shoot rifled slugs like Remington Sluggers or Brenneke KO's through a rifled barrel, just expect to do more scrubbing with the brass brush when it's time to clean. They tend to lead the barrel about the same way shooting lead bullets through a revolver will.
jheitertusa is offline  
Old October 1, 2009, 07:34 PM   #5
Mike40-11
Senior Member
 
Join Date: January 8, 2005
Location: Missouri
Posts: 800
They shoot well out of my Mossberg 500 with a fully rifled barrel. Pretty much same POI as the Winchester sabot slugs.

However, I have some concerns on their performance. My son shot a wounded whitetail that my buddy had already hit. He was at about 20 yards. When we skinned the deer later I found the slug. It had stopped on a rib, though it did break it. The slugs look like an inverted ashtray or bowl with the opening to the rear. The plastic wad fits in there. The front end is big and flat.

Now I don't know if there was something odd about this particular shot but that's terrible penetration. With sabots out of the same gun I've never found the slug still in the deer and have more than once broken both shoulders.
Mike40-11 is offline  
Old October 1, 2009, 07:42 PM   #6
tjh
Senior Member
 
Join Date: September 25, 2009
Location: North Central Ohio
Posts: 160
thats all a friend and I shoot out of our Winchester 1300's with rifled barrels ,there tack drivers and deer killers .
tjh is offline  
Old October 2, 2009, 12:01 AM   #7
Old Grump
Member in memoriam
 
Join Date: April 9, 2009
Location: Blue River Wisconsin, in
Posts: 3,144
I shoot Foster and Brenneke's through smoothbore and rifled barrels and find no difference in accuracy, just more cleaning to do on the rifled barrel. Only reason I do it is I am to cheap to buy sabot rounds and I like the rifle sights on the slug barrel.
__________________
Good intentions will always be pleaded for any assumption of power. The Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern will, but they mean to govern. They promise to be good masters, but they mean to be masters.
--Daniel Webster--
Old Grump is offline  
Old October 2, 2009, 07:12 AM   #8
Lee Lapin
Senior Member
 
Join Date: September 7, 2004
Location: SE NC
Posts: 1,236
There's a sabot version of the KO too, as well as the 'rifled' one.

Sabot- http://www.wholesalehunter.net/outdo...2-Shotgun.html

Rifled- http://www.wholesalehunter.com/produ...productid=9847

fwiw...

lpl
__________________
Mindset - Skillset - Toolset. In that order!

Attitude and skill will get you through times of no gear, better than gear will get you through times of no attitude and no skill.
Lee Lapin is offline  
Old October 2, 2009, 08:46 AM   #9
sdclaw
Member
 
Join Date: September 15, 2009
Posts: 22
thanks everyone
sdclaw is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08391 seconds with 9 queries