The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools
Old September 26, 2009, 09:42 PM   #1
ophidia
Member
 
Join Date: July 4, 2009
Location: West Fargo, ND
Posts: 64
shopping list to start casting?

My father, who is new to reloading, wishes to start casting bullets. I've been reloading for a few years but haven't gotten into casting (yet).

Anyway, could someone put together a "shopping list" for me? I'm not sure what all is needed but would like to be able to help him get started. Price is an object and assuming it's reliable Lee is perfectly acceptable.

He's thinking 300 gn bullets for .44 magnum and 405gn for 45/70.

Thanks!
__________________
Reload for 22-250,38spl/357 Magnum, .300 WSM, .44 Magnum (for Desert Eagle), and 45LC for a Ruger Blackhawk.
ophidia is offline  
Old September 27, 2009, 07:40 PM   #2
RGS
Member
 
Join Date: June 17, 2005
Location: Oregon
Posts: 78
Cast Boolit Forum

ophidia,

Hang around these guys for a while. They can answer questions, and get you started. They also have group buys for things like molds, gas checks, alloy and several members make stuff you'll need like boolit lube, mold handles, flux and other stuff.

Read old posts that sound interesting. You will learn a lot.

I shot commercial cast bullets for many years before I stumbled onto these guys. I started casting about 13 months ago and managed to turn out some good bullets in weights and designs that are simply not available commercially.

http://castboolits.gunloads.com/index.php
RGS is offline  
Old September 28, 2009, 07:14 AM   #3
hornady
Senior Member
 
Join Date: April 6, 2009
Location: SWPA
Posts: 428
The very first thing I would do is get a copy of either the Lyman or RCBS cast bullet Manual. I have the Lyman but I use lyman molds. Which gives most of the loads for there bullets. The Manual will explain in detail what is needed. I am not going to go into detail. But there is quite a lot of information you will need to go along with the equipment. RCBS molds are a little more expensive than Lyman. Lee molds are a lot cheaper. And a lot of guys use them. I have in the past and just don’t care for them. But starting out. Lee Would probably be your best bet. Lyman and RCBS you are talking about. $250.00 start up. Lee with Tumble lube about $80.00. Either way I would get one of the above Manuals to get the basics down.
hornady is offline  
Old September 28, 2009, 10:33 AM   #4
snuffy
Senior Member
 
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 2,757
You could go right here on TFL to the cast bullets forum. I'd suggest you read this link to get some ideas;

http://www.thefiringline.com/forums/...d.php?t=346199

Then too, the cast boolits forum is where you can get more info than you'd ever need.

http://castboolits.gunloads.com/

WARNING casting bullets is addictive. It's almost magical how you can turn scrap lead into a bullet that works as good as jacketed.
__________________
The more people I meet, the more I love my dog

They're going to get their butts kicked over there this election. How come people can't spell and use words correctly?
snuffy is offline  
Old September 28, 2009, 11:11 AM   #5
hornady
Senior Member
 
Join Date: April 6, 2009
Location: SWPA
Posts: 428
Its funny how you turn into a lead junkie . I find my self on the hunt for it all the time. Parking lots, tire deales. scrap yards.
hornady is offline  
Old September 28, 2009, 11:41 AM   #6
rbf420
Senior Member
 
Join Date: August 1, 2009
Posts: 153
most everything you can buy off of midwayusa...

list
Lee furnace... aprox $32
lee bullet molds.. $20
find out too if you will need gas checks
Lee dipper $3

a large cast iron pot is nice to make lead into smaller more managable sizes by then using a muffin pan to mold them. and a large ladle to scoop.

as far as getting lead, you can use wheel whieghts or if you really want to get good stuff you can buy some wiedeners shooting supply has got some decently price lead.

do buy a lyman cast bullet or lee modern reloading book. makes it an easier tranistion.

as far as safety gear... discount saftey gear is fairly cheap. depending on how safe you wanna be a respirator is optional but thick gloves and googles are essential.

there is also a casting sticky i beleive on the bullet casting forum on this site that will give a good overview on it all... good luck!
rbf420 is offline  
Old September 28, 2009, 08:24 PM   #7
Shane Tuttle
Staff
 
Join Date: November 28, 2005
Location: Blue Grass, IA
Posts: 8,530
And moving to the casting forum..
__________________
If it were up to me, the word "got" would be deleted from the English language.

Posting and YOU: http://www.albinoblacksheep.com/flash/posting
Shane Tuttle is offline  
Old September 30, 2009, 12:51 PM   #8
trip_sticker
Member
 
Join Date: August 28, 2009
Posts: 88
Don't forget youtube also. I watched many good videos on "how to do stuff" and when I stumbled upon the bullet casting, that is what got me first interested in it.
trip_sticker is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07944 seconds with 9 queries