The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 22, 2009, 05:25 PM   #1
300savage
Junior Member
 
Join Date: June 22, 2009
Posts: 2
Hornady dies on a RCBS press?

excuse my ingnorance due to being new to reloading but I have the dies I need for a .300 Savage made by Hornady But the press I was given is an older RCBS Are dies intercompatible between different press manufacturers

Last edited by 300savage; June 22, 2009 at 05:28 PM. Reason: title
300savage is offline  
Old June 22, 2009, 05:45 PM   #2
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
If they are the standard thread versions, then yes. They should be.
oneounceload is offline  
Old June 22, 2009, 06:25 PM   #3
stratmeister
Junior Member
 
Join Date: June 22, 2009
Posts: 4
Yes, dies from different manufacturers are a standard 7/8x14 except for really large case calibers like 50 BMG. All .300 Savage dies I've seen are that size and so is the RCBS press (I have an old Reloder Special 2, great single stage press).
stratmeister is offline  
Old June 22, 2009, 06:44 PM   #4
paknheat
Senior Member
 
Join Date: October 17, 2006
Location: East Texas
Posts: 242
I also use Hornady dies on my RCBS presses and have never had a lick o trouble.
paknheat is offline  
Old June 23, 2009, 11:51 AM   #5
McClintock
Senior Member
 
Join Date: December 5, 2008
Location: The Bald Prairie of Southern Saskatchewan, Canada
Posts: 305
Only the SDB dies are proprietary, I think

As far as I know, the only proprietary dies available belong to the Dillon Square Deal B press, the rest, except for the already mentioned 50 BMG, should be a standard size.

Cheers!
McClintock
McClintock is offline  
Reply

Tags
300 , hornady , rcbs , reloading , savage

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06565 seconds with 9 queries