Mossberg 590A1

helit13 · June 18, 2009, 11:16 AM

I just recently bought a new Mossberg M590A1. I want to put a heat shield on it and I have heard multiple things about doing so. Is there a certain shield I can order online or do you need to modify one? If someone knows of the produce or website that I can order one from that would be very helpful.

oneounceload · June 18, 2009, 11:22 AM

Try Mossberg:

http://www.mossberg.com/cgi-bin/comm...&category=ACCE

**hogdogs** · June 18, 2009, 11:26 AM

There are several it but I heard the thicker barrel may be of interest...
I have no need for the shroud other than possible cool factor in the looks dept.
Brent

Vergeltung · June 18, 2009, 12:17 PM

mine came with one.

carry on.

helit13 · June 18, 2009, 01:38 PM

Im assuming if I order the heat shield off of the mossberg website it will fit snug on my 590A1??

Vergeltung · June 18, 2009, 01:40 PM

no. I believe there's a fitment issue, as your barrel is thicker. I think.

D-E-T-O-X · June 18, 2009, 02:22 PM

how about i just trade you my 590 for your 590a1

next shotty i buy. cause you can never have too many of them!

MagnumWill · June 19, 2009, 01:06 PM

Personally, I thought I would need the heat shield, 'cuz I'd be dumb and burn myself, and I haven't had one problem with it yet when I pulled the heat shield off. I think a 590A1 barrel looks better without it, I dig the meaty sewer pipe look.

**hogdogs** · June 19, 2009, 03:44 PM

You will only burn yerself once on a barrel!

I used to shoot a single shot with no fore stock... just a wide rubber band on it... After 4 shots you tend to hold it different.

I have never had a shrouded barrel. I did burn myself once on my 500 but it was after trying to "glow" the barrel in the 100 degree florida heat. I ran 75 or so rounds thru it then set it down, grabbed another beer and after 10 minutes or so I thought it would be cooled off... OOPSY I hadn't left the action open

Blisters on all my fingers and thumb...
Brent

shortwave · June 19, 2009, 05:51 PM

Quote:

Personally, I thought I would need a heat shield, cuz I'd be dumb and burn myself

Shoot with welding gloves on

. Hey hogdogs, you get that scooter yet?

June 18, 2009, 11:16 AM	#1
helit13 Junior Member Join Date: June 18, 2009 Posts: 2	Mossberg 590A1 I just recently bought a new Mossberg M590A1. I want to put a heat shield on it and I have heard multiple things about doing so. Is there a certain shield I can order online or do you need to modify one? If someone knows of the produce or website that I can order one from that would be very helpful.

June 18, 2009, 11:26 AM	#3
hogdogs Staff Join Date: October 31, 2007 Location: Western Florida panhandle Posts: 10,689	There are several it but I heard the thicker barrel may be of interest... I have no need for the shroud other than possible cool factor in the looks dept. Brent __________________ Finally have designs going up in the Hogdogs Outdoor Apparel online store. http://www.cafepress.com/hogdogsoutdoorapparel Thanks for lookin'...

June 18, 2009, 12:17 PM	#4
Vergeltung Senior Member Join Date: November 12, 2008 Location: near NYC, USA Posts: 292	mine came with one. carry on. __________________ *Tuitio Fidei et Obsequium Pauperum*

June 18, 2009, 01:40 PM	#6
Vergeltung Senior Member Join Date: November 12, 2008 Location: near NYC, USA Posts: 292	no. I believe there's a fitment issue, as your barrel is thicker. I think. __________________ *Tuitio Fidei et Obsequium Pauperum*

June 18, 2009, 02:22 PM	#7
D-E-T-O-X Member Join Date: February 14, 2009 Location: ANAKRIME , KALIFORNIA Posts: 47	how about i just trade you my 590 for your 590a1 next shotty i buy. cause you can never have too many of them! __________________ G-TROOP

June 18, 2009, 11:22 AM	#2
oneounceload Junior member Join Date: April 18, 2008 Location: N. Central Florida Posts: 8,518	Try Mossberg: http://www.mossberg.com/cgi-bin/comm...&category=ACCE

June 18, 2009, 01:38 PM	#5
helit13 Junior Member Join Date: June 18, 2009 Posts: 2	Im assuming if I order the heat shield off of the mossberg website it will fit snug on my 590A1??

June 19, 2009, 01:06 PM	#8
MagnumWill Senior Member Join Date: March 19, 2009 Location: Central Colorado Posts: 655	Personally, I thought I would need the heat shield, 'cuz I'd be dumb and burn myself, and I haven't had one problem with it yet when I pulled the heat shield off. I think a 590A1 barrel looks better without it, I dig the meaty sewer pipe look. __________________ Always carry an extra magazine when CCW. Friends don't let friends get a double-feed first round out. -Will

June 19, 2009, 03:44 PM	#9
hogdogs Staff Join Date: October 31, 2007 Location: Western Florida panhandle Posts: 10,689	You will only burn yerself once on a barrel! I used to shoot a single shot with no fore stock... just a wide rubber band on it... After 4 shots you tend to hold it different. I have never had a shrouded barrel. I did burn myself once on my 500 but it was after trying to "glow" the barrel in the 100 degree florida heat. I ran 75 or so rounds thru it then set it down, grabbed another beer and after 10 minutes or so I thought it would be cooled off... OOPSY I hadn't left the action open Blisters on all my fingers and thumb... Brent __________________ Finally have designs going up in the Hogdogs Outdoor Apparel online store. http://www.cafepress.com/hogdogsoutdoorapparel Thanks for lookin'...