The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old May 20, 2009, 10:52 PM   #1
Buzzard Bait
Senior Member
 
Join Date: June 25, 2008
Location: Republic of Texas
Posts: 338
Air Gauged barrel?

I read about premium barrels being air gauged to measure the inside diameter. I have no idea how this gauge works or is used can someone educate me?

Buzzard bait
Buzzard Bait is offline  
Old May 21, 2009, 01:44 AM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,658
I can't claim to be an expert, but as I understand it, air gauges are used not just for barrels, but for gauging all sorts of holes. Basically, a air gauge acts like a piston in an automobile engine. One end of the barrel is pressurized and a precision plug passed through it. The amount of air escaping around the plug is measured. The instrument is calibrated for the desired tolerances (range of air flow) and if the amount is too great or too small, the part being inspected fails, being out of spec. Any parts of the barrel larger than others are easily detected as the air flow increases at that point.

Here is a pretty good discussion, not quite detailed enough in that area, but interesting.

http://www.riflebarrels.com/articles...f_accuracy.htm

Of course just using an air gauge doesn't prove anything. It is like saying something is "inspected" without saying what the inspection found. A maker can say his product has been "air gauged", meaning only that the test was run, not that the results were correct or even if they were that the product will meet the customer's expectations.

The problem is that, as the article says, gauging a barrel is just one of the components of getting accuracy. In the old days, when the Army sold M1903 match rifles with star gauged barrels (a star gauge was an early type of mechanical barrel gauge), they were considered the holy grail. Match shooters would stop just short of bloody murder to get their hands on one of those precious star gauged rifles. (Today they are collectors items and there are many fakes, some dating to the aforementioned desire.)

Anyway, the problem was that some of those rifles with the precision barrels had a problem - they wouldn't shoot worth a darn.

Jim
__________________
Jim K
James K is offline  
Old May 21, 2009, 08:33 AM   #3
brickeyee
Senior Member
 
Join Date: December 29, 2004
Posts: 3,342
Quote:
Basically, a air gauge acts like a piston in an automobile engine. One end of the barrel is pressurized and a precision plug passed through it. The amount of air escaping around the plug is measured.
Not exactly.

A carefully dimension cylinder is passed through the hole while air is pumped into passages inside the cylinder that exit on the circumference.

The back pressure created by passing the cylinder through the bore indicates clearance between the bore and the cylinder.

It is more of a uniformity check than an absolute measure.
Changes in the pressure indicate variations in bore diameter.
brickeyee is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07273 seconds with 9 queries