|
April 13, 2009, 07:07 PM
|
#1 |
|
Senior Member
Join Date: June 28, 2004
Posts: 664
|
Brass drift punch
Please recommend a set of these.
Thanks! |
|
|
April 13, 2009, 08:20 PM
|
#2 |
|
Member
Join Date: August 3, 2006
Posts: 20
|
Brownell's has a very good set as does midway usa.
__________________
In over 30 years as a professional gunsmith I never once got up in the morning and didn't want to go to work. |
|
|
|
April 14, 2009, 10:08 PM
|
#3 |
|
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 3,099
|
Go to your local hardware shop and buy a length of brass bar stock in the diameter you need. Cut to length with a hack saw and file the ends smooth. If you need a 1/8" punch, keep the length short. 4" is plenty.
__________________
Spelling and grammar count! |
|
|
|
April 14, 2009, 11:01 PM
|
#4 |
|
Senior Member
Join Date: June 28, 2004
Posts: 664
|
bar stock
Thanks for the tip!
Dave |
|
|
|
April 15, 2009, 08:32 AM
|
#5 |
|
Senior Member
Join Date: September 19, 2008
Posts: 3,268
|
For many years, I've been using the hinge pin, taken out of a household interior door's brass hinge.
A new complete hinge, at Lowe's or Home Cheapo, shouldn't run more than $2-$3. . |
|
|
|
April 15, 2009, 01:00 PM
|
#6 | |
|
Senior Member
Join Date: December 29, 2004
Posts: 3,342
|
Quote:
|
|
|
|
 |
| Thread Tools | |
|
|
