The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 20, 2009, 12:46 AM   #1
Gregory Gauvin
Senior Member
 
Join Date: March 6, 2009
Posts: 199
Loose trigger

My trigger in my 1911 has more up and down side to side play then I would like. It is not necessary that I correct this, but then again, I am a tinkerer. I am more concerned about the up and down play then the side to side.
I'd like to utilize the stock trigger, as fitting an oversized aftermarket trigger to this factory stock "Custom" gun may be problematic in that fact that the trigger bow cuts in the frame are undersized.

What is the best method to correct this? Would silver soldering the top and bottom of the trigger, and then filing to fit work or is there a better method?
Gregory Gauvin is offline  
Old March 20, 2009, 02:02 AM   #2
Nnobby45
Senior Member
 
Join Date: November 20, 2004
Posts: 3,148
I think I'd be more inclined to see if a bent, improperly fitting trigger bow could be the problem.

Anything beyond that might be Smithie territory.
Nnobby45 is offline  
Old March 20, 2009, 04:02 AM   #3
Gregory Gauvin
Senior Member
 
Join Date: March 6, 2009
Posts: 199
I haven't tried to fit an aftermarket trigger. This is just what I am told from others who have tried.

I'm just looking to fit the stock part better than what they did at the Brazilian factory.
Gregory Gauvin is offline  
Old March 20, 2009, 10:26 AM   #4
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,407
The proper way to do what you are asking about is to replace the trigger with an aftermatket trigger. Using silver solder to try to build up the edges will not last, silver solder is relatively soft and will eventually wear to the point that the trigger will get loose again.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05844 seconds with 9 queries