The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 13, 2009, 08:16 AM   #1
ECHOONE
Junior member
 
Join Date: February 10, 2008
Location: FL
Posts: 204
Help Refinishing Grips

I'm planning on refinishing my wood grips,I want to stain with a silver/Gray stain, and use Linseed oil to finish and protect. Is Linseed the way to go? could someone brefly summarize best steps of applying, grips are tactical not smooth,top half are checkered bottom half are stippled and I don't want the finish to be glumping up on the checkered area so not sure on the best way to apply on the checkered area? I believe hand rubbing linseed in is the best way but I'm not sure as I never did grips b4. How many coats? Is 24 hr wait time between coats long enough? Should I lightly sand after each coat? any help and suggestions would be appreciated.......
Thanks
ECHOONE is offline  
Old March 13, 2009, 11:23 AM   #2
sadsack
Senior Member
 
Join Date: February 4, 2006
Posts: 206
Echoone: Tung oil would probably be better for your grips, as it will soak into the wood better than linseed oil. You'll have to use a chemical stripper and a tooth brush to remove the old finish. Just paint the tung oil onto the grips and let them soak up as much as they will. Wipe(and brush with another tooth brush) off any excess and let dry over night. Two or three coats should be enough. You'll not be able to hand rub with the checkering and the strippling, but tung oil is easy to touch up when you need it later.
sadsack is offline  
Old March 19, 2009, 10:25 PM   #3
filthysavage
Junior member
 
Join Date: March 11, 2009
Location: Western Pa.
Posts: 40
Help Refinishing Grips

Linseed oil is great...for fence posts.Nobody uses this anymore,with good reason.The stuff never dries.Use tung oil its easily controllable,every consecutive coat makes it glossier
filthysavage is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06046 seconds with 9 queries