The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 16, 2009, 07:34 PM   #1
glennjw
Junior Member
 
Join Date: January 6, 2009
Posts: 2
Lefever Nitro Assembly Problem

Does anyone know the trick to compressing the hammer springs on the Lefever Nitro SXS in order to slide the drift pin back through the hammers. Any help would be greatly appreciated. Thanks
glennjw is offline  
Old February 17, 2009, 01:27 PM   #2
Voyageur
Member
 
Join Date: October 28, 2008
Location: In the Shining Mountains
Posts: 72
I've never had to deal with that specifically on the Lefever glenjw.

Hop on over to: www.shotgunworld.com and have them repost the pictures of the jig they made to accomplish what you want.
Voyageur is offline  
Old February 17, 2009, 02:01 PM   #3
Slopemeno
Senior Member
 
Join Date: January 19, 2007
Posts: 2,384
An aquaintence made a tool to compress the spring when he inserted it. I think he bent a cheap screwdriver ( going back to about 1981 or so) into a shape that allowed him to push the spring up, into the action from beneath while the action was in a padded vise.
Slopemeno is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05921 seconds with 9 queries