The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 31, 2009, 08:17 PM   #1
kenfa03
Member
 
Join Date: January 19, 2009
Posts: 71
Head space

Bought a used Savage Md110 with a 7mm08 barrel that had been installed in place of original. I have to put quite a bit of pressure on the bolt in order to close it on factory ammo. Also the same amount of pressure required on new brass. Is it safe to fire this rifle or should I have head space adjusted first?
kenfa03 is offline  
Old January 31, 2009, 08:29 PM   #2
LHB1
Senior Member
 
Join Date: March 25, 2005
Location: Houston, TX
Posts: 1,545
Who installed the barrel? I would definitely have the gun chamber and headspace checked before firing it if factory ammo won't chamber easily.
__________________
Good shooting and be safe.
LB
LHB1 is offline  
Old January 31, 2009, 08:56 PM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,247
The Savage barrel is removable and adjustable for headspace. Someone has tried that and set it much too short because they didn't have a headspace gauge to set it correctly with. In its current condition it is unsafe to fire because the reduced space raises the chamber pressure. I may not blow up on firing, but you can potentially do damage to the gun or weaken the bolt lugs. Take it to a gunsmith or send it to the factory to be corrected and inspected for damage. You don't know how much the previous owner may have fired it that way?
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member

Last edited by Unclenick; January 31, 2009 at 09:05 PM.
Unclenick is offline  
Old January 31, 2009, 09:13 PM   #4
kenfa03
Member
 
Join Date: January 19, 2009
Posts: 71
Thanks. It is supposedly a lightly used barrel but not sure about the action. I will get the head space corrected and go from there. He said he would refund my money if I wanted but I would really like to keep it.
kenfa03 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07455 seconds with 9 queries