The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 27, 2009, 11:22 AM   #1
blue dingo
Member
 
Join Date: January 16, 2009
Location: East Texas
Posts: 22
Remington 6 1/2 primers

Howdy all. I've looked at this forum many times in reference and decided to join in. My question is about the Remington 6 1/2 primers. I'm seeing conflicting and confusing details about what their use is and wanted to see if anyone uses them in either the .223 Rem or .17 Rem. My Hornady 7th manual shows where this is the std small rifle primer and the 7 1/2 is the match primer from Remington. I've read some accounts where the 6 1/2 was too thin for the .17 Rem and might result in pierced primers on firing. I've read where Remington developed the 7 1/2 just for the higher pressures of the .17 Rem yada yada... Since the election scare has made the 7 1/2's almost extinct I've found some of the 6 1/2's but not sure if they are suitable for anything but the Hornet class rounds. Thanks for the help and great forum.
blue dingo is offline  
Old January 27, 2009, 03:11 PM   #2
saber9
Senior Member
 
Join Date: January 8, 2008
Location: West Texas
Posts: 147
I was told many years ago by a experienced and knowledgeable gunsmith and reloader that the Remington 7 1/2 primer was their small rifle Bench Rest primer, that it was developed for their .222 and .223 cartridges. The main difference in it and the standard 6 1/2 small rifle primer was the thickness and/or hardness of the metal. I also have seen in some publications the 7 1/2 referred to as a small rifle magnum primer.

I would suggest looking at several sources of reloading data and seeing what they call for in the .17 Remington. The safest thing would probably be to use 7 1/2 primers or the small rifle bench rest primers from CCI, Winchester, or Federal.
saber9 is offline  
Old January 27, 2009, 04:38 PM   #3
DaveInPA
Senior Member
 
Join Date: January 20, 2008
Location: Berks County, PA
Posts: 1,106
There is a warning directly on the box that the 6 1/2 primers should not be used in .223, among others. They're basically just for the .22 Hornet, IIRC.
DaveInPA is offline  
Old January 27, 2009, 05:39 PM   #4
Shoney
Senior Member
 
Join Date: February 21, 2002
Location: Transplanted from Montana
Posts: 2,311
Here is a page that lists the primers by manufacturer:
http://www.lasc.us/primerchart.htm

Generally, if you have a bolt or semi-auto weapon, it does make a difference which primer brands you use. Beacuse semi-autos are prome to slamfires, harder primers are prefered. CCI makes on of the thicker cupped primers.

Where to use a standard or magnum primer is often dictated by the powder used. Spherical (ball) powder use magnums, while many extruded powders are listed with regular. The loading books will tell you which primes they used with their recipe.
__________________
I pledge allegiance to the Flag - - -, and to the Republic for which it stands….Our Forefathers were brilliant for giving us a Republic, not a democracy! Do you know the difference??? and WHY?http://www.wallbuilders.com/LIBissue...les.asp?id=111
Shoney is offline  
Old January 28, 2009, 03:45 AM   #5
snuffy
Senior Member
 
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 2,774
Using the rem. 6-½ primers cost me a new bolt for my AR-15! They pierced right along side of the firing pin dent, the resulting hot flame cut grooves in the bolt face. The 7-½ primer is fine for use in the .223. I don't know about the 17, don't have one or load for one.
__________________
The more people I meet, the more I love my dog

They're going to get their butts kicked over there this election. How come people can't spell and use words correctly?
snuffy is offline  
Reply

Tags
.17 , .17 remington , .223 , 6 1/2 primer , remington primer

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06610 seconds with 9 queries