The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 9, 2008, 12:21 PM   #1
Tony27920
Junior Member
 
Join Date: October 9, 2008
Location: Arizona
Posts: 2
Need advise on Single action 45 Uberti Cattleman

I purchased my Model 1873 Cattleman (black powder frame) used, about a month ago and just had the chance to fire it,, As I was letting the six rounds off I noticed that the cylinder was binding up.. I needed two hands, (on hammer and cylinder) to turn it.. At first I thought it was the ammo, primer backing out, I was wrong.. So I tried a different brand,, same thing, I also shoot blanks out of my 45's so I tried some of them, samething,, I took the gun apart and noticed the "hand" that turns the cylinder had strange notches in it like someone applied forced to the hammer to turn the cylinder........ Can anyone tell me is it hard to ruin the hand???????
Tony27920 is offline  
Old October 10, 2008, 02:33 AM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,450
Sounds like it is snubbing in transition, i.e.the hand was not fitted properly. Off to the gun doctor for a new one!!
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old October 17, 2008, 07:47 PM   #3
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
jamed

Sir;
Check your barrel/cylinder gap and the fit in the frame of your cylinder insert. Also, check and make sure your firing pin isn't "buggered" up and hitting shell rime. The marks in your "hand" are indicative of either condition.
Harry B.
Harry Bonar is offline  
Old November 3, 2008, 11:29 AM   #4
Tony27920
Junior Member
 
Join Date: October 9, 2008
Location: Arizona
Posts: 2
Thanks guys,,, I sent it back to Cabelas and they are supposed to correct the problem,,,,,,,We'll see.................
Tony27920 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06005 seconds with 9 queries