The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools
Old October 1, 2008, 09:45 AM   #1
Senior Member
Join Date: January 1, 2007
Location: Idaho
Posts: 2,060
I brake for anodyzing

Does anyone know if anodyzing and brake cleaner are compatible?
salvadore is offline  
Old October 1, 2008, 10:18 AM   #2
Moderator Emeritus
Join Date: March 11, 2000
Location: Indianapolis, IN
Posts: 15,977
Anodizing shouldn't be harmed by any solvents.

However, many alloy firearms parts (such as S&W revolver frames on the silvery-looking stainless Airweights and AirLites, and Ruger 10/22 receivers) are also finished with a paint-like bake-on finish or a clear coat that can be harmed by aggressive solvents such as brake cleaner.
2% Unobtainium, 98% Hypetanium.
The Arms Room: An Online Museum.
Tamara is offline  
Old October 1, 2008, 10:23 AM   #3
Senior Member
Join Date: January 1, 2007
Location: Idaho
Posts: 2,060
Thank you.
salvadore is offline  
Old October 1, 2008, 10:24 AM   #4
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 11,804
Anodizing is electrically deposited, and is not generally affected by the types of solvents most people use. Brake cleaner will not hurt it.

BUT there are a lot of catalyzed resin coatings out there that look like anodizing, so if in doubt, use some solvent on a patch in an inconspicuous area of the piece.
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old October 1, 2008, 01:20 PM   #5
Bill DeShivs
Senior Member
Join Date: April 7, 2006
Posts: 7,774
Anodizing is a surface hardening process for aluminum. During this process the surface is porous and can be dyed any color. There is a finishing process that seals the pores of the aluminum. If this process is not perfect, the dye can begin to seep out of the surface. Test in an inconspicuous area to be sure.
Bill DeShivs, Master Cutler
Bill DeShivs is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:35 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04883 seconds with 9 queries