The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old September 14, 2008, 02:00 AM   #1
the yankee bandit
Junior Member
 
Join Date: July 19, 2008
Location: Castleford, Idaho
Posts: 1
Can you put a buttstock on a Thompson TA5?

Hi,

I have been looking at getting a Thompson TA5 pistol. This is a tommy gun with 10" barrel, vertical foregrip and 50 round drum. This tommy doesn't have a buttstock, so it is classified as a pistol.

I was wondering if it is physically possible to put a buttstock on this model. I know the legal possiblity is another question. I can't tell from photos of the TA5 if a buttstock will fit or not.

Thanks for your help.
the yankee bandit is offline  
Old September 14, 2008, 08:44 AM   #2
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,631
They're made without the attachment points necessary, but a milling machine can do wonders in that regard; you'd still be making a SBR, so you'd probably be better off going the OTHER way, taking a 16" rifle and either shortening the existing barrel or installing an original TSMG barrel.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old September 15, 2008, 02:08 AM   #3
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 704
aluminum receiver

The pistol is an aluminum receiver and won't hold up to hard use.

The mounting would have to be done custom as the mounting points are not on the pistol.

Auto Ordnance sells a factory SBR with the detatchable buttstock which would be much easier to just buy than to build one on a rifle and have to buy an additional barrel and get it installed.
David Hineline is offline  
Old September 17, 2008, 11:15 AM   #4
cat9x
Senior Member
 
Join Date: September 17, 2008
Location: Texas
Posts: 212
I'd recommend going w/ the factory Kahr SBR, I have one and they are a handful of fun...you won't be dissapointed!

cat9x is offline  
Old September 17, 2008, 06:16 PM   #5
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 11,321
I saw one of these pistol at a gun show last weekend

The bottom of the lower reciever, where the stock would attach is rounded, and there are no holes for the stock screws. To get the regular stock to mount correctly, you would have to mill the reciever flat, then drill and tap it for the screws. The pistol has an alloy frame, so I don't think it would hold up well with the heavy buttstock attached, if there ever was any stress on the stock. It might, they sell a version of the carbine with an alloy frame, but I can't say how durable they are, compared to the steel ones.

Like cat9x suggested, if you want the SBR version, buy one made that way, after ATF/state approval.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07868 seconds with 9 queries