The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old September 13, 2008, 06:27 PM   #1
GM-GUY
Senior Member
 
Join Date: April 27, 2005
Location: The People's Republic of MA
Posts: 149
Idea to make your rod better

I hit upon a great idea (at least I think so ) while cleaning my rifle this week.

Have you ever had the jag (I use tipton nickel plated) bang on the crown while pulling the rod back? Well I came up with a cheap easy fix.

Take a piece of Heat Shrink Tubing, put in on the rod over the metal to fiberglass interface if you have one (Tipton Rod) and shring it down with a lighter. It increases the diameter of the rod just enough to make the jag miss the crown but no so much as to scour the chemicals out of the barrel.

I use automotive grade heat shink tubing as this is chemical resistant.
__________________
EX-USAF, NRA, GOAL, CCW-ALP

PS3 Network ID: GM-GUY
GM-GUY is offline  
Old September 13, 2008, 07:47 PM   #2
CortJestir
Senior Member
 
Join Date: July 7, 2008
Location: Southern CT
Posts: 1,406
Whoa, for a minute there, I thought this was spam. Gotta get my mind out of the gutter...

Anyway, glad I clicked through. That's a great tip. I'm always so worried about nicking the crown when cleaning my barrels. So much I've resorted to using bore snakes, but for the deep cleaning, you just have to use a good brush and rod.
__________________
"They have men amongst them who know very well what they are about..."
- Lord Hugh Percy, on the events of April 19, 1775
Do you know what you're about? Find out at an Appleseed near you.
CortJestir is offline  
Old September 14, 2008, 10:23 AM   #3
bcarver
Senior Member
 
Join Date: February 22, 2007
Location: Jackson,Mississippi
Posts: 836
cleaning

I don't run the jag out the barrel.
I push the brush until its at the crown.
Same with the jag.
Pull every thing out the chamber.
bcarver is offline  
Old September 14, 2008, 11:56 PM   #4
hoghunting
Senior Member
 
Join Date: March 27, 2006
Posts: 1,368
I use the Accupro jags that have an O-ring at the base. The O-ring has a larger diameter than the jag, so the metal doesn't bang the bore or muzzle.

http://www.brownells.com/aspx/NS/sto...tle=PRO%20JAGS
hoghunting is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07052 seconds with 9 queries