The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 28, 2008, 09:03 PM   #1
HorseshoerJT
Member
 
Join Date: July 24, 2008
Location: NORTHERN California
Posts: 28
Load info

Just recieved my new pistol. T.C. Contender with 16.75 inch barrel, from Bullberry Barrel Work's. 30/30 cal., muzzle break, custom wood. I would like to shoot Nosler 125 grn ballisitc tip B/T's. Any help with a starting point with load recipe will be appreciated. Some folk's I talk to suggest W748 powder. Sierra book suggest IMR4198? What do you think?
__________________
Hunt hard, Teach a kid to hunt, Enjoy life.
HorseshoerJT is offline  
Old August 29, 2008, 06:46 PM   #2
rg1
Senior Member
 
Join Date: November 6, 2001
Posts: 752
The new Lyman 49th Manual lists only 3 powders for the 30-30 tested in a
14" Contender. They used Win cases and Win LR primers. The 3 powders tested with the Sierra 125 SP bullet were IMR4198, IMR3031, and Win 748.
IMR-4198 from 24-26 grains 1909-2159fps
IMR-3031 from 28-32 grains 1893-2239fps
Win 748 from 35.5-41 grains 1907-2210fps
This is with the Sierra bullet and not Noslers. Overall length with the Sierra 125 SP is listed at 2.600" oal. The 748 will fill the case more as the 41 grains is a compressed load. Either powder will work ok but I tend to stay away from the fastest powder and the slowest and in this case I would try the 3031 first. 748 is a little temperature sensitive.
I've got a Remington XP-100R pistol in .223 and I find they are a little tricky to shoot accurately. Completely different than having a stock against your shoulder for support.
rg1 is offline  
Old August 29, 2008, 07:15 PM   #3
crowbeaner
Senior Member
 
Join Date: June 4, 2007
Location: Upstate SC
Posts: 1,938
Start with 34.0 of WW 748 and work up in 1/2 grain increments. One of the best bullets for your Contender in the 30/30 is the Hornady 130 grain spirepoint, #3020. It's a bit on the light side for 308 and 30/06 rifles, but does an admirable job on smaller deer and antelope in the shorter barrels. You can also use BLC2 if you have some; it is close to 748 and really shoots well.
__________________
If you want your children to follow in your footsteps, be careful where you walk.
Beware the man that only owns one gun; he probably knows how to use it.
I just hope my ship comes in before my dock rots.
crowbeaner is offline  
Old August 29, 2008, 07:39 PM   #4
Loader9
Senior Member
 
Join Date: July 29, 2008
Posts: 949
Out of my 16", I'm using 35.0 gr H335 with the Nosler bullet. But be prepared to set the woods on fire. The muzzle flash is pretty big. I also use this same load with the 110 gr Carbine bullets. Both shoot under an inch at 100 yds. The 110 loads I use primarily to move folks away from me at the range. The muzzle blast is painful. Out of a 10" barrel it's blinding. You might also try SR4759. It's very bulky and the 19.0 grs under a 150 gr bullet almost shoots in a hole at 100 yds. The 19.0 grs will almost fill the case and there is little muzzle flash.
Loader9 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06631 seconds with 9 queries