The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 24, 2008, 05:29 AM   #1
RockyMtnTactical
Senior Member
 
Join Date: October 21, 2006
Location: Western US
Posts: 1,957
Where to get Tung Oil?

I am refinishing my Mauser... Where would be a good place to get Tung Oil? I already checked Wal Mart? Kinda shocked they didn't have any...

You think Home Depot will have it?

Any particular brand that is better than others?
RockyMtnTactical is offline  
Old July 24, 2008, 06:37 AM   #2
Shorts
Senior Member
 
Join Date: November 21, 2004
Posts: 1,484
Maybe Lowe or Home Depot. They have the stuff on the shelves here at the base exchange. Not at WalMart? I'm stumped
Shorts is offline  
Old July 24, 2008, 08:21 AM   #3
Joat
Senior Member
 
Join Date: March 31, 2008
Location: Dayton, TX
Posts: 383
Ace Hardware or True Value
__________________
All things being equal, fat people use more soap. (I know I am one.) High speed, low drag does not even come close to describing ME.
Joat is offline  
Old July 24, 2008, 08:43 AM   #4
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
tung oil

Sir;
Tung oil is an excellent choice!
You will have a hard time getting pure tung oil but try a Marine supply - it's used on boats for treating Teak wood.
Harry B.

Last edited by Harry Bonar; July 24, 2008 at 08:44 AM. Reason: spelling
Harry Bonar is offline  
Old July 24, 2008, 08:43 AM   #5
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS (new to MS)
Posts: 4,775
The tung oil finishes you get from the big box hardware stores aren't really tung oil - they are varnishes that contain very little (if any) actual tung oil in them. I've used Minwax brand tung oil finish to do a couple of stocks and it seems to work ok. True tung oil can be had from the specialty woodworking mail-order sites. However, pure tung oil takes a LONG time to properly cure.
Doyle is online now  
Old July 24, 2008, 08:58 AM   #6
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
tung oil

Sir;
Just forgot to tell you, you can get pure tung oil from WOODCRAFT if you have one near you.
Harry B.
Harry Bonar is offline  
Old July 24, 2008, 09:03 AM   #7
SilentHitz
Senior Member
 
Join Date: February 28, 2008
Location: Ms.
Posts: 1,984
1st you put your tung in a vise, then... Seriously, I got mine at the hardware store near me. As others stated, check to make sure it's the real deal.
SilentHitz is offline  
Old July 24, 2008, 01:12 PM   #8
Ledbetter
Senior Member
 
Join Date: February 23, 2000
Location: California USA
Posts: 4,535
As pointed out, Tung Oil Finish is mostly varnish.

You want "100% Tung Oil." You can thin it with 100% mineral spirits. It does take a LONG time to dry/cure.
__________________
Regards,

Ledbetter
from thefiringline
TFL #4573
NRA for Life
Winchester Canyon Gun Club for Life
Ledbetter is offline  
Old July 24, 2008, 01:52 PM   #9
Alleykat
Junior member
 
Join Date: July 26, 2007
Posts: 3,668
I don't know if Formby's is 100% tung oil or not, but I know it sure does well on furniture.
Alleykat is offline  
Old July 24, 2008, 02:45 PM   #10
brickeyee
Senior Member
 
Join Date: December 29, 2004
Posts: 3,342
Woodcraft is a good source of the real stuff
http://www.woodcraft.com/family.aspx?FamilyID=768
brickeyee is offline  
Old July 24, 2008, 06:05 PM   #11
MikeD99
Member
 
Join Date: March 26, 2008
Location: Leesburg, VA
Posts: 36
I saw it in a tack shop a long time ago.

Mike D.
MikeD99 is offline  
Old July 24, 2008, 07:25 PM   #12
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 5,947
Every Walmart that I have been in carries a product called Birchwood Casey Tru-Oil. It is usually with the gun cleaning supplies. This is a formula of tung oil designed for gun finishing. The bottle is small looking but it is enough for at least 2 guns. Rub it in with your bare hands until there are no runs. Wait several hours between coats. As the finish builds up it takes very little for each new coat. I usually apply 8-10 coats and wipe down with 0000 steel wool when finished.
jmr40 is offline  
Old July 25, 2008, 02:01 PM   #13
Inspector3711
Senior Member
 
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,546
Squeeze your tung forcefully until oil is expelled.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times)
"That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell
Inspector3711 is offline  
Old July 26, 2008, 11:32 AM   #14
Ruger4570
Senior Member
 
Join Date: April 3, 2005
Location: Rochester, New York
Posts: 2,136
I bought a bottle of 100% pure tung oil from a company named "The Real Milk Paint Co." Their website is www.realmilkpaint.com
It is the real thing, not too pricy and a 8oz bottle will probably last you a lifetime.
I used it on 2 gunsstocks so far and hardly dented the amount in the bottle. It gives a great "oil" finish and drys overnight or faster.
Ruger4570 is offline  
Old July 26, 2008, 03:43 PM   #15
armedandsafe
Senior Member
 
Join Date: January 9, 2005
Location: Moses Lake WA
Posts: 1,001
I like Tung oil. It works well as a finish and protectant.

However, I sure like to find a source of the oil we used on Dad's FN Mauser in 48. He got a one ounce bottle of it from a friend in Ohio and it lasted until about 68. Apparently, nobody is pressing oil from cherry seeds, anymore.

Pops
__________________
Armed and Safe: Not just a theory

If it time to bury them, it is time to dig them up.
Remember, "Behind every blade of grass."
armedandsafe is offline  
Old July 26, 2008, 05:23 PM   #16
tsgt
Junior Member
 
Join Date: July 26, 2008
Posts: 1
I get it at True Value. The brand they carry is Hope's. About $20 a quart. Good stuff.
tsgt is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09385 seconds with 9 queries