The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 10, 2008, 10:42 PM   #1
REVOlution
Junior Member
 
Join Date: July 10, 2008
Posts: 4
Remington 7400 Finish

Hey there ! Long time lurker, first time poster here. I am relatively new to firearms but I have managed to acquire a couple of guns over the past year or so. Shotgun wise I have a Winchester 1200 12ga and a new Super X2.

Also, I just purchased my first slightly used rifle, a Remington 7400 30-06. As the stock and forearm did not match, I purchased a new Remington wood stock and forearm a gentleman had removed from his new rifle and replaced. My question is this: my Super X2 wood is clear coated and quite shiny. The new Remington wood is finished nicely but does not seem to have a very good clear coat. If it does have a clear coat, it is not very shiny or hard. How can I put a good quality clear coat on it? Should I take this to my local gunsmith or is there a product I can get myself? Thanks for your time and any help is greatly appreciated.

Aaron
REVOlution is offline  
Old July 11, 2008, 01:21 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,646
Most gun owners don't really want a shiny stock, but since you do there are several products you can use, including a high gloss spar varnish, which is used by some gun manufacturers. It dries very hard and shiny, unlike many polyurethanes that can soften after contact with the hands.

Jim
__________________
Jim K
James K is offline  
Old July 12, 2008, 01:52 PM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,476
I typicall recommend TruOil for refinishing stocks, since it is very resistant to chemicals and does not have a tacky feel. Or, if you are unsure of what to do with it, take it to a good gunsmith for refinishing.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05683 seconds with 9 queries