The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 8, 2008, 09:20 AM   #1
nedfig
Senior Member
 
Join Date: March 2, 2000
Location: Houston, Texas
Posts: 263
Hi-Power question

Hi, I tore my FEG Hi-Power down this weekend for the first time after getting it last week. After I put it all back together, the bar that lifts up when pulling the trigger keeps falling out and it lays into the mag well. It is still attached at the base it just lays back and sticks out. Did a spring or some kind of keeper fall out? I looked up parts diagrams and nothing appears to be missing. What is going on? Sorry for the terrible pic.

Thanks



nedfig is offline  
Old July 9, 2008, 03:29 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 20,001
If you have the parts diagrams, try giving us some part name other than "the bar that lifts up." It sort of sounds like the ejector is falling forward, which it will do if the sear pin is not through it to hold it, but the pic is so bad I can't even tell it is of a gun, let alone which part that is.

Jim
__________________
Jim K
James K is offline  
Old July 11, 2008, 08:43 AM   #3
BHP9
Member
 
Join Date: May 19, 2004
Posts: 76
Do you have the tail of the trigger return spring in the notch of the trigger lever?

I think not.
BHP9 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06785 seconds with 9 queries