The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 5, 2008, 01:38 AM   #1
WAWaltherFan
Junior Member
 
Join Date: February 2, 2008
Posts: 3
.270 Win Woodleigh 150 gr Weldcore PP SN

I have some .270 Win Woodleigh 150 gr Weldcore PP SN. The Woodleigh website has no reloading data. All it says is the following:

Quote:
As a general rule Woodleigh RN and PP bullets generate similar pressures to conventionally constructed soft nose bullets. You can use published data from other bullet and powder manufacturers. For safety, reduce by 5% and work up.
The BC is .463 and the closest thing I found was in the Hornady Manual #7. They have loads listed for a 150 gr SP with a BC of .462. The #1 powder they recommend is H4350 using anywhere from 46.6 gr to 52.3 gr. I am using CCI benchrest large rifle primers and Federal once fired brass. Has anyone loaded the 150 gr Woodleigh in .270 Win? Any loads you can recommend?
WAWaltherFan is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05274 seconds with 9 queries