The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old April 3, 2008, 08:01 PM   #1
Pinball
Member
 
Join Date: March 25, 2002
Location: Outer Romulak
Posts: 65
Knife Enlightenment for a Lefty

Hi all,
I am looking for a daily carry with serrated/regular blade which can be opened

easily by a left handed person. I'd like to keep the price at 60.00 or lower. I

absolutely will not buy a knife from China. You suggestions appreciated as I am

not up on the subject. Jump right in.
__________________
Between the Lines
Pinball is offline  
Old April 3, 2008, 08:20 PM   #2
saands
Senior Member
 
Join Date: November 14, 1999
Posts: 1,563
I have NO idea what size knife you are looking for and how much abuse you will want it to take. For true lefty operation, you will want to get something ambidextrous ... knives, like firearms, have action styles ... some lend themselves better to being made ambidextrous than others:

Liner-locks and integral/frame locks are really one-sided while Benchmade's Axis lock and the many variations that have appeared in response to it are GREAT for being ambidextrous. While the cheapest of the Benchmades are now made off-shore, many are still made in Oregon. I typically dress in slacks and EDC one of these: http://www.defenseknife.com/bm530.html ... it ALMOST fits your budget. If it had aluminum scales, it would be perfect ... as is, it is a really nice knife and is exceptionally thin if you take the clip off. Benchmade makes a LOT of their designs with the axis lock ... of the US made knives in your price range, the BM website merits a long visit ... then look on-line to get a good price. Keep in mind that the BM models with 5 digit part numbers (their "Red Class") are usually made in Taiwan ... I'm pretty sure that the 3 and 4 digit models are all made in Oregon. If you are comparing brands, keep in mind that 2 to 4 Rc hardness points will make a big difference in how well your blade will hold an edge ... I have made knives in the Rc 62-64 range that will dress half a dozen deer before needing a sharpening while a knife with Rc 56 would be lucky to finish one (I'm guessing, though, as even my EDC is a RC 58-60 ... I wouldn't buy a knife that was softer than Rc 58).

Hope this helps ...

Saands
saands is offline  
Old April 3, 2008, 08:53 PM   #3
Pinball
Member
 
Join Date: March 25, 2002
Location: Outer Romulak
Posts: 65
Hey saands! Thanks! I usually wear jeans so a knife of 6.5-7.5 inches when open seems okay to me. Appreciate the info.
__________________
Between the Lines
Pinball is offline  
Old April 3, 2008, 09:03 PM   #4
Mainah
Senior Member
 
Join Date: July 9, 2007
Posts: 496
Sierra Trading Post has some Benchmade knives on sale, check their hunting section on the website.
Mainah is offline  
Old April 3, 2008, 09:05 PM   #5
saands
Senior Member
 
Join Date: November 14, 1999
Posts: 1,563
If you can skip a few beers and squirrel away the change, look at the Benchmade mini-presidio ... it is a little too thick for slacks, but it is my jeans knife ... as a working knife, it actually IS perfect. I have a Chris Reeve Sebenza (and a little bit of a knife problem, obviously ) and I still prefer to carry the mini-presidio. It locks up like a bank vault and is worth the $105 that it costs.

Just a thought ...

Saands
saands is offline  
Old April 3, 2008, 09:38 PM   #6
armedandsafe
Senior Member
 
Join Date: January 9, 2005
Location: Moses Lake WA
Posts: 1,001
My CRKT PM and my Kershaw1560ST suit me. The Kershaw has a reversible stud. The CRKT has double studs. In both cases, the clip is not reversible, but that is not a large factor for me.

I wonder is either of those companies would move the clip, or, at least, drill and tap the opposing scale for us. hmmmm

Pops
__________________
Armed and Safe: Not just a theory

If it time to bury them, it is time to dig them up.
Remember, "Behind every blade of grass."
armedandsafe is offline  
Old April 14, 2008, 06:53 PM   #7
shop20
Junior Member
 
Join Date: April 13, 2008
Posts: 3
Lefty knife for under $60

Would you buy a knife made in Japan? I have 2 Spyderco Delica folders, and they are tapped for the clip to be mounted on either end and either side. The serrations are pretty wicked. I like Benchmade too, but I've noticed that their serrations are more like waves these days. That might be a good thing since serrated blades tend to catch and rip, rather than cut, for some applications. The steel handled Delica models are 3" blades good for us living here in "Kalifornia", and are typically selling for $45-$55.
shop20 is offline  
Old April 22, 2008, 12:28 PM   #8
Pinball
Member
 
Join Date: March 25, 2002
Location: Outer Romulak
Posts: 65
Hey guys. Sorry I haven't gotten back sooner. Thanks for the info. Saands, I have no problem with knives made in Japan or Philipines. I will check out your suggestions. Shop20, I am gonna look at those also.
__________________
Between the Lines
Pinball is offline  
Old April 22, 2008, 01:46 PM   #9
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,445
Check out Ontario Cutlery knives. The RTK3 is a folder with a 4" 1095 carbon steel blade. Very well made and hold a good edge for a long time.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old April 22, 2008, 09:12 PM   #10
ElectricHellfire
Senior Member
 
Join Date: February 22, 2008
Location: The Woodlands, Texas
Posts: 2,271
I have a Spyderco Endura also made in Japan that is ambidextrious and quite a good knife.
__________________
Texas, the only State to Have Ever Kicked Another Country's Butt
ElectricHellfire is offline  
Old April 23, 2008, 05:54 AM   #11
b.thomas
Senior Member
 
Join Date: October 8, 2006
Posts: 324
Spyderco Endura or Delica both work good.
b.thomas is offline  
Old April 23, 2008, 06:47 AM   #12
clown714
Senior Member
 
Join Date: October 13, 2001
Location: ga
Posts: 395
for under $60.

i'm a lefty and i'd say check out

the spyderco endura.

used to be my EDC.

clown
clown714 is offline  
Old April 23, 2008, 08:46 AM   #13
stephen426
Senior Member
 
Join Date: March 11, 2005
Posts: 2,884
Check out www.knifeworks.com . I've bought quite a few knives from them before and they are a top notch company. I agree with the Benchmade recommendation, especially the Axis lock for ambidextrous opening. Most of their knives also come in half serrated versions. You could also check Ebay, but most Benchmades are from Ebay stores rather than regular auction. Knifeworks.com beats Ebay prices most of the time anyways.
__________________
The ATF should be a convenience store instead of a government agency!
stephen426 is offline  
Old April 24, 2008, 11:16 AM   #14
Inspector3711
Senior Member
 
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,546
One of the Kershaw Ken Onion speedsafe designs... Very quick one finger opening with either hand. Opens with a spring not a flip of the wrist... Like a switchblade but legal. I've carried the scallion model for 5 years now. You can be carrying something and pull the knife with the other hand, deploy blade, cut, close blade and put back in pocket with one hand in a matter of seconds. The blades sharpen easily and are set in place with a thumb operated liner lock. This model includes a pocket clip and a crossbar safety that is actuated with the pnky of either hand. The scallion is under $30 at Walmart and is available with a serrated blade.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times)
"That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell
Inspector3711 is offline  
Old April 25, 2008, 10:03 PM   #15
Johnny C!
Junior Member
 
Join Date: March 18, 2000
Posts: 1
CRKT SF Knives

If you buy the CRKT Special Forces version
(with the aluminum handles) you get a great
knife, reversible belt clip. Tip up or tip down, too.
Stay away from the Zytel "Z" and "G" versions.
The handles are plastic & do not have the
reversible clip feature and they lose the quality
knife feel. I have several really nice knives that
I like, including some very nice Ken Onion Kershaw's
with opening assist, but my every day carry to work
& weekends is my CRKT M-16 SF. It is 4-5/8"
closed & 8-1/8 open. If that is too large, the M16-10
KE is it's smaller brethren. At 4" closed & 7-1/8" open,
it's a little less intimidating if you get at out in a work
place where political correctness is spoken. The
dual thumb studs make it quick to deploy & the
liner lock coupled with the Auto Lawks, it makes
for a very sturdy tool.

I haven't looked at retail prices for these knives
lately, but you can find these at guns shows &
other discount locations for under $60

The M-21 series is just too big for me personally,
& I have large hands.

http://www.crkt.com/m16spfrc.html

Sorry to ramble, but when I find a nice product
at a reasonable price, I tend to tell my friends
about it. And I don't work for CRKT...

Later!

Johnny C!
Johnny C! is offline  
Old April 26, 2008, 04:46 PM   #16
JustDreadful
Senior Member
 
Join Date: April 22, 2008
Location: Sin City
Posts: 270
For what purpose? I also have a CRKT and a Kershaw Onion, a Leek. The Kershaws are much nicer - straighter grinds and such - and made in the USA. The CRKTs are cruder, made in Taiwan, but chunkier and sturdier, and as Johnny said have a stronger lock. Probably a bit more ambidextrous as well, with their "flipper" openers. They'll tear up your pants pocket, if that's a concern. I like the CRKT for outdoor stuff, but I have more affection for the Leek.

If you're looking for a se;f-defense piece, save up your milk money and get an Emerson.
JustDreadful is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10293 seconds with 9 queries