The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 14, 2008, 06:57 PM   #1
jbyerly
Junior Member
 
Join Date: April 14, 2008
Location: Piedmont, NC
Posts: 4
Lee shell holder question from a new reloader

I just bought out a friends reloading gear, 3 shotshell reloaders, a Lyman turret press, a whole bunch of SWC bullets and assorted other stuff. In the box was a Lee Auto Prime, can anyone direct me to a chart or page that shows which shell holders fir which caliber. I am sure this is the first of many questions, thanks in advance.
jbyerly is offline  
Old April 14, 2008, 07:03 PM   #2
Yoosta B. Blue
Senior Member
 
Join Date: February 12, 2008
Location: Just a tad NE of the Alamo...
Posts: 252
Welcome, jbyerly, to the wonderful world of reloading! This forum is a great resource to avail yourself of and there are many helpful enthusiasts who will happily help.

Here is a chart with some shellholder info that will show you what goes with what. (You'll need to scroll down aways...)

http://www.leeprecision.com/html/cat...l#Shellholders

Yoosta B. Blue
Yoosta B. Blue is offline  
Old April 15, 2008, 07:37 AM   #3
Leeman
Member
 
Join Date: October 20, 2007
Posts: 58
The chart should be on the bottom of the box.
Leeman is offline  
Old April 15, 2008, 07:49 AM   #4
.45 Vet
Senior Member
 
Join Date: May 21, 2004
Location: Western Penn.
Posts: 370
Bear in mind that the AUTO-PRIME requires it's own special shell-holders. I think Mid-Way still has the entire elevin piece set still on sale.
__________________
For those who've never fought for it, the price of freedom shall never be known...
.45 Vet is offline  
Old April 15, 2008, 10:48 AM   #5
wncchester
Senior Member
 
Join Date: December 1, 2002
Posts: 2,832
IF you need to buy a Lee primer shell holder, spend the money to buy the assortment kit of 11 holders. It's such a good price it will save you money in the long run if you need more than a couple.

The Lee primer tool shell holders have the same numbers as their press type holders. And both are made the same but the primer holders don't have the lower half that fits into the slots of a press ram. When I've needed primer holders that Lee doesn't make (for old obsolete cartridges) I've annealed standard press type holders and then hacksawed off the bottom part, worked fine.
wncchester is offline  
Old April 16, 2008, 11:41 PM   #6
jhansman
Senior Member
 
Join Date: June 17, 2007
Posts: 624
You can also download the directions for the Autoprime, which has the shell holder chart in it:
http://www.leeprecision.com/cgi-data...uct/PT1023.pdf
__________________
Blessed is the man who has nothing to say, and cannot be compelled to say it.
jhansman is offline  
Old April 17, 2008, 11:52 AM   #7
gandog56
Senior Member
 
Join Date: May 31, 2006
Location: Mobile, Alabama
Posts: 964
But do be aware that even though the set says UNIVERSAL shellholder set, it isn't. I had to order a separate one for my 7.62X54R.
__________________
Some people think I'm paranoid because I have guns. If I have guns, what do I have to be paranoid about?
gandog56 is offline  
Old April 18, 2008, 08:47 AM   #8
Leeman
Member
 
Join Date: October 20, 2007
Posts: 58
Now you can appreciate the empty hole in the box.
Leeman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07365 seconds with 9 queries