The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 8, 2007, 11:27 PM   #1
bigbradyb
Junior Member
 
Join Date: December 3, 2007
Posts: 4
HELP!!!

I am loading .223 REM for my AR15's. I just started loading in bulk to get some "blasting" rounds. I bought a bulk package of remington 55 gr hollowpoint. In the past I have reloaded bullets with a boattail. These bullets have a flat base. I am having a helluva time getting them started when I am trying to seat them. There is no space (not enough flare in the neck) and it crushed the case when I tried to start them. I am using rcbs low base dies. Any help would be appreciated! All of the bulk "cheap" bullets that I know of have a flat base. I would like to get this issue fixed.

Thanks
bigbradyb is offline  
Old December 9, 2007, 12:08 AM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,408
You need to chamfer the neck of the cases. The base of the bullet is hanging up on the sharp edge of the case neck. Chamfering the cases will eliminate the problem.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old December 9, 2007, 01:18 AM   #3
Shoney
Senior Member
 
Join Date: February 21, 2002
Location: Transplanted from Montana
Posts: 2,311
I think Scorch covered it, but for a point of clarification, you are resizing the new brass before you load- - -Aren't you????
__________________
I pledge allegiance to the Flag - - -, and to the Republic for which it stands….Our Forefathers were brilliant for giving us a Republic, not a democracy! Do you know the difference??? and WHY?http://www.wallbuilders.com/LIBissue...les.asp?id=111
Shoney is offline  
Old December 9, 2007, 02:30 AM   #4
bigbradyb
Junior Member
 
Join Date: December 3, 2007
Posts: 4
I am resizing it and chamfering it. It is new winchester brass.
bigbradyb is offline  
Old December 9, 2007, 06:36 AM   #5
qajaq59
Senior Member
 
Join Date: November 15, 2005
Posts: 139
It might be time to get out your micrometer and see if the bulk bullets are the size they are supposed to be. And while you're at it, check the cases as well.
qajaq59 is offline  
Old December 11, 2007, 05:40 PM   #6
rrp
Senior Member
 
Join Date: February 18, 2006
Location: west central Wi
Posts: 298
bullet seating problem

Please let us know when and what you find on this problem. I've loaded thousands of flat base bullets for the .223 and have never had anything like this happen. thanks
rrp is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07653 seconds with 9 queries