The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 8, 2007, 06:15 AM   #1
The Shooting Cat
Member
 
Join Date: December 8, 2007
Location: Milan, Italy
Posts: 38
Problem with my prime lever - Lee Classic Turret

Hi there,

just received my new Lee Classic Turret, and I'm experiencing this problem:

the LPS primer arm (the "L" shaped metal part) is not perfectly aligned with the two bumps on the base of the press; it is more on the left bump than centered. I read from the instructions booklet that this can be solved by rotating the end of the ram to align the arm. On my press, I tried, but I seem unable to rotate it. Seems to hard. What shall I exactly rotate ? I tried, but the ram seems absolutely unmoavable.

Thank-you for your help!

TSC
The Shooting Cat is offline  
Old December 8, 2007, 10:20 AM   #2
Frenchwrench
Member
 
Join Date: January 19, 2005
Location: Indiana but my land is in Colorado
Posts: 80
You need to put the ram up, loosen the collar for the index and turn the ram using the primer arm. Retighten and go. Or with ram up remove the toolhead from the index and turn the ram.Have fun....
__________________
When in trouble, when in doubt, run in circles, scream and shout.
Frenchwrench is offline  
Old December 8, 2007, 01:16 PM   #3
DannyAbear
Member
 
Join Date: November 20, 2006
Location: Baton Rouge, La.
Posts: 72
You can't turn the ram because it is pinned to the toggle linkage; as long as it inserts primers ok I wouldn't worry about it. Mine does land inbetween the 2 bumps.
DannyAbear is offline  
Old December 8, 2007, 07:20 PM   #4
croc4
Senior Member
 
Join Date: March 9, 2006
Location: Santa Clara, Ca
Posts: 190
had the same issue, during the course of reloading, the top part of the ram would rotate and mis-align with the bumps. Unscrewed it and put on some lock tight, never had a problem since
croc4 is offline  
Old December 10, 2007, 08:05 PM   #5
The Shooting Cat
Member
 
Join Date: December 8, 2007
Location: Milan, Italy
Posts: 38
Hey folks, you're great. It did need a wrench to do the work, but I actually turned the top of ram a bit and got it aligned.

Fantastic. Thanks for the help, guys.

TSC
The Shooting Cat is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06600 seconds with 9 queries