The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 14, 2007, 01:45 PM   #1
odsixer
Senior Member
 
Join Date: May 17, 2007
Location: great white north
Posts: 316
What type of gun rest?

Which rest do you use when developing a load? I normally shoot off a bipod but I'm going to be developing a load for my .308 and I would like to use a rest of some kind to eliminate any shooter error.

Thanks
odsixer is offline  
Old November 14, 2007, 02:24 PM   #2
rgitzlaff
Senior Member
 
Join Date: January 8, 2006
Location: Madison, WI
Posts: 517
I almost always use a bipod. Light and easy to transport, not like those tripod type benchrests that cost like $200. Sandbags are heavy and awkward to transport. I use a beanbag under the rear of the gun however.
rgitzlaff is offline  
Old November 14, 2007, 02:43 PM   #3
Splat!!
Member
 
Join Date: February 13, 2007
Posts: 69
Sandbags,, when developing a load........
Splat!! is offline  
Old November 14, 2007, 04:29 PM   #4
shepherddogs
Senior Member
 
Join Date: January 9, 2007
Posts: 1,007
If you decide to get one and want a nice one, look at Sinclair. A guy had one at the range and that thing was awesome. Aroud $200 he said. Don't get the dirt cheap ones like I did. You just end up replacing them for a better one. I did that twice. Now I have a Caldwell Rock. It's nowhere near as nice as the Sinclair plus its made in China which I generally avoid.
shepherddogs is offline  
Old November 14, 2007, 07:32 PM   #5
Stargazer
Senior Member
 
Join Date: August 6, 2006
Location: Republic of Texas
Posts: 506
Caldwell sells a rest that supports in the front and the rear. And it is way open wide in the center and even a FAL with magazine or an AK with a 30 round magazine will fit in between it. About $40 and has a cutout in the lower middle that a sandbag could be placed to hold it firmer to the table/bench.
__________________
5.56mm, reach out and touch something. .458 SOCOM,reach out and knock something down.


M70 Web Page
Stargazer is offline  
Old November 15, 2007, 07:06 PM   #6
odsixer
Senior Member
 
Join Date: May 17, 2007
Location: great white north
Posts: 316
Thanks for the input, I might try the bipod with a sandbag at the rear or look at the sinclair. I agree on the avoidance of chinese made product and I think we should all take a look at where our products are made.
odsixer is offline  
Old November 15, 2007, 07:46 PM   #7
Ozzieman
Senior Member
 
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 4,949
Listen to shepherddogs

Sinclair Int. is the place to go and look at the better grade. There also very good to work with.
Ozzieman is offline  
Old November 15, 2007, 09:17 PM   #8
629 shooter
Senior Member
 
Join Date: February 9, 2002
Location: IN , USA
Posts: 967
I hit Sinclair every few months and looked at their display rest. It appears to be a top quality piece - $249 - $328.
__________________
"One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors."
629 shooter is offline  
Old November 15, 2007, 09:27 PM   #9
rwilson452
Senior Member
 
Join Date: June 10, 2004
Location: Tioga co. PA
Posts: 2,360
I have a Cadwell BR under the pointy end and a Protector bag filled with silica sand under the blunt end. Sorry I can't recall the protector model but it has big ears and a solid leather base.
rwilson452 is offline  
Old November 15, 2007, 11:46 PM   #10
amamnn
Senior Member
 
Join Date: May 13, 2006
Location: WA, the left armpit of the USA
Posts: 1,323
If you really truly want to know what the round is doing and you don't want ANY human interference, you will want to look at the Lead Sled, which I believe is made by Caldwell. If you are going to be using your rest for BR shooting or long range varmint shooting, Sinclair is definitely the place to start looking.I buy from them often for BR equipment and supplies, but I do not believe they stock the lead sled, though I don't know for sure. They do stock some items that the general shooting public use, though quite often you can find the same or similar items for less money at Midway USA or Graf and sons.

One very good shooter error eliminator that Sinclair stocks that you will not likely find at the other places is the offset anti cant device. Put one of these on your scope and you might eliminate a very common problem that causes flyers. Few people outside competitive shooters use them and they are probably the ones who need it most. I like the offset model because I can see it clearly without moving my head and ruining my cheek weld.
__________________
"If the enemy is in range, so are you." - Infantry Journal
amamnn is offline  
Old November 16, 2007, 09:26 PM   #11
bigautomatic
Senior Member
 
Join Date: December 18, 2005
Location: Ohio
Posts: 610
Depends on how many greenbacks you are willing to let go of. Serious performance aint cheap. Depending on your budget, somewhere between $20 and $1,000 and beyond. I prefer Sinclair rests.
bigautomatic is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08274 seconds with 9 queries