The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 12, 2007, 11:14 PM   #1
RevolverLover
Senior Member
 
Join Date: November 22, 2004
Posts: 1,682
Lee Hand Press Quality?

I have been using a Lee Hand Press for years and have been really pleased with it. They are great for load development. I have been thinking about getting a couple for Christmas gifts. So, how is the quality of the current production Lee Hand Presses?
__________________
All I ever seem to read on this Internet is a bunch of "I heard..." or "I read..." sort of stuff.

"One test = 1,000 expert opinions." -Art Eatman
RevolverLover is offline  
Old November 13, 2007, 12:23 AM   #2
glockopop
Senior Member
 
Join Date: December 15, 2005
Location: Southern Indiana
Posts: 922
I've been using one for about a year, and I've had absolutely no problems. I just got a real good deal on a Dillon press from a TFL member, so I won't be using it as much, but I'm glad the Hand Press was given to me first so I could learn the basics of handloading.

I will advise you that if you give these as gifts in calibers for autos, get the three or four die set. The speed die seems like a good idea but you can't adjust the crimp, and I had feeding problems in my 1911 before I got the Factory Crimp Die.

The Lee Hand Press is a damn nice gift, mine was given to me by my girlfriend's dad!
__________________
I've only got two hands, but I've been known to carry three Glocks.
RZA
glockopop is offline  
Old November 13, 2007, 07:37 AM   #3
Sigma 40 Blaster
Senior Member
 
Join Date: July 1, 2007
Location: East Texas
Posts: 997
I got one a few months back, it's held up well. I basically only use it for decapping pistol brass and decapping/resizing rifle brass and it's held up well for a few thousand cycles.
Sigma 40 Blaster is offline  
Old November 13, 2007, 10:11 AM   #4
Leeman
Member
 
Join Date: October 20, 2007
Posts: 58
I love the Lee Hand Press for loading at my shooting bench.

The Lee Hand Press will load most any caliber. For some glowing praise read what users say about it on the www.midwayusa.com
Leeman is offline  
Old November 14, 2007, 01:23 PM   #5
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,412
I slicked mine up by treating the parts with MolyFusion oil. The dies go in and out smooth as steel, now and the ram just falls open. Not necessary, but gives it a nice feel.

glockopop,

Not sure why your speed die crimps can't be adjusted? I just turn the die body in an out a little to do that, same as for a separate crimp die. Once you know where you want it, a couple of scratch marks with a carbide scratch awl and you will always be able to find it again. You may have to change it back for sizing, but I always do all the sizing first, prime and charge the cases, then adjust the die for seating and crimping.

Nick
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old November 14, 2007, 10:30 PM   #6
BigJakeJ1s
Senior Member
 
Join Date: August 8, 2005
Location: Arlington TX
Posts: 650
Never had any real problems with mine (for pistol plinking ammo that is), but the ram was mis-aligned to the die by a good 1/16" at the top of stroke, and it was springy as all get-out.

I bought a Huntington Compac hand press, and it is way better (at a way higher price:~$90 IIRC). It is much better designed, and I used it up until my wife bought be a co-ax last Christmas.

Andy
BigJakeJ1s is offline  
Old November 15, 2007, 07:24 AM   #7
retrieverman
Member
 
Join Date: August 20, 2007
Posts: 46
I have bought 3 Lee Hand Presses in the last couple of months and love them. I had been using a Lee Loader and decided to upgrade and bought one. I got tired of changing dies, so I bought 2 more. They function flawlessly.
retrieverman is offline  
Old November 15, 2007, 01:43 PM   #8
chris112
Junior Member
 
Join Date: April 13, 2006
Posts: 10
Just triied case forming (for the first time) yesterday. Triied using my Lee Hand Press, just too springy to get the last 1/2 millimeter resized. That should give you an idea how good the current production is.
chris112 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06962 seconds with 9 queries