reply page change/can't see other posts

Prichard · July 11, 1999, 01:50 PM

n

[This message has been edited by Prichard (edited February 07, 2000).]

Zach · July 11, 1999, 01:53 PM

Prichard, the author of the software made it easier for us IE users. Me embedded an IFRAME. It displays the thread....well at least it did before....

Jim V · July 11, 1999, 05:05 PM

It does not now, you get a "click here to view this topic again" message.

------------------
Ne Conjuge Nobiscum
"If there be treachery, let there be jehad!"

spark@onestopknifeshop.com · July 11, 1999, 06:41 PM

It's a bandwidth saver. If you need to reveiw the thread as you are typing your response, click on the appropriate link.

Spark

------------------
Kevin Jon Schlossberg
SysOp and Administrator for BladeForums.com
www.bladeforums.com

boing · July 11, 1999, 07:03 PM

Oooooohhhh...I get it now!

There's a little link down there, then you just minimize/maximize the window. Works in a jiffy! YAY!

-boing

**Mal H** · July 11, 1999, 07:46 PM

The link method works, of course. But if you use "Back" the thread is usually stored in your buffer and displays instantly. Then use "Forward" to get back to the reply screen. It is usually faster than reloading the link. This was pointed out by Rich in the topic "Up to your old tricks, Rich?".

boing · July 11, 1999, 09:42 PM

The "two window" method is actually faster than "back/forward" for me. I think I just have a decrepit 'puter.

But thanks, anyway, Mal.

-boing

July 11, 1999, 01:50 PM	#1
Prichard Senior Member Join Date: February 7, 1999 Posts: 263	n [This message has been edited by Prichard (edited February 07, 2000).]

July 11, 1999, 01:53 PM	#2
Zach Member Join Date: October 15, 1998 Posts: 42	Prichard, the author of the software made it easier for us IE users. Me embedded an IFRAME. It displays the thread....well at least it did before....

July 11, 1999, 05:05 PM	#3
Jim V Senior Member Join Date: January 31, 1999 Location: SE Michigan - USA Posts: 4,039	It does not now, you get a "click here to view this topic again" message. ------------------ Ne Conjuge Nobiscum "If there be treachery, let there be jehad!"

July 11, 1999, 06:41 PM	#4
spark@onestopknifeshop.com Wise Guy Join Date: October 10, 1998 Posts: 665	It's a bandwidth saver. If you need to reveiw the thread as you are typing your response, click on the appropriate link. Spark ------------------ Kevin Jon Schlossberg SysOp and Administrator for BladeForums.com www.bladeforums.com

July 11, 1999, 07:03 PM	#5
boing Senior Member Join Date: December 24, 1998 Location: Henderson County, NC Posts: 1,072	Oooooohhhh...I get it now! There's a little link down there, then you just minimize/maximize the window. Works in a jiffy! YAY! -boing

July 11, 1999, 07:46 PM	#6
Mal H Staff Join Date: March 20, 1999 Location: Somewhere in the woods of Northern VA Posts: 14,089	The link method works, of course. But if you use "Back" the thread is usually stored in your buffer and displays instantly. Then use "Forward" to get back to the reply screen. It is usually faster than reloading the link. This was pointed out by Rich in the topic "Up to your old tricks, Rich?".

July 11, 1999, 09:42 PM	#7
boing Senior Member Join Date: December 24, 1998 Location: Henderson County, NC Posts: 1,072	The "two window" method is actually faster than "back/forward" for me. I think I just have a decrepit 'puter. But thanks, anyway, Mal. -boing