The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 28, 2007, 03:39 PM   #1
barbarian48
Junior Member
 
Join Date: October 28, 2007
Posts: 1
Winchester Mod 70 Pushfeed

I have a Winchester Model 70 manufactured in 1972. It is a long action factory chambered in .338 Win Mag. The recoil is brutal, I'd like to rebarrel in 7MM STW.

Will the 7MM STW fit in this action?

Last edited by barbarian48; October 28, 2007 at 04:37 PM.
barbarian48 is offline  
Old October 28, 2007, 07:45 PM   #2
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
Mod 70

Sir:
If you like the 338 WM you might buy a limb-saver recoil pad - they really work.
Harry B.
PS. If you do want a professional re- barrel job send it down to Douglas bbls. Charleston W.Va.
Harry B.
Harry Bonar is offline  
Old October 28, 2007, 08:52 PM   #3
ZeroJunk
Senior Member
 
Join Date: August 14, 2006
Location: Browns Summit NC
Posts: 2,471
I had a post 64 in 300 WBY which should be the same length as the STW.It uses different scope bases than the standard length magnums so I think the action is longer or at least has a longer opening.
ZeroJunk is offline  
Old October 28, 2007, 09:03 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,152
I am not well acquainted with the 7mm STW, but Winchester made the Model 70 for it, so what you suggest shouldn't be that much of a problem. I suggest you talk to your gunsmith about it and see what he says. Note that just having a long enough action is not necessarily all there is to it. Those cartridges are different enough in profile that you might need to rework the magazine feed rails.

Jim
__________________
Jim K
James K is offline  
Old October 30, 2007, 06:43 PM   #5
HankB
Senior Member
 
Join Date: March 30, 2000
Location: Central Texas, outside of Austin
Posts: 1,694
Let's see how the two cartridges compare in recoil, using Barnes' Cartridges of the World as a data source . . .

A typical 338 Mag load will push a 250 grain bullet at ~2710 ft/sec, using 70 grains of powder. Recoil energy in a 9 lb rifle will be around 36 ft. lbs.

A 7mm STW will push a 175 grain bullet at ~ 3109 ft/sec, using 90 grains of powder. Recoil energy in a 9 lb rifle will be around 33 ft. lbs.

Thanks to the extra powder, you really wouldn't be reducing recoil much with top loads.

You can download the 7mm STW, but you could do the same with the 338.

Suggest you run the numbers yourself and decide if the conversion is worth it.
__________________
To be kind to your enemy is to be cruel to yourself - Sun Tzu
HankB is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06289 seconds with 9 queries