The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 10, 2007, 07:37 PM   #1
boltgun71
Senior Member
 
Join Date: January 4, 2006
Location: Pennsylvania
Posts: 541
.243 Win handloaders, what to try first?

I only want to experiment with one bullet for the moment. I have 70gr Sierra BltzKings and 85gr HPBT Sierra GameKings. What do you suggest I should start with first. I have a Remington 700 BDL Varmint Special and intend to use it for woodchucks and target shooting. From what I have read IMR-4350 seems to be the #1 powder to start with, do you agree? I have IMR 4350, 4895, 4064, 4198, 4320, and 7828 on hand. Anyone have a load to recommend for one of the above bulllets with any of these powders? My new Winchester cases are re-sized, trimmed, tumbled, and primed just waiting for powder and a bullet. What should I try first?
boltgun71 is offline  
Old June 10, 2007, 07:52 PM   #2
257roberts
Member
 
Join Date: December 26, 2006
Posts: 41
243 load

I use 46.5 grains of IMR 4350 under the 70 grain blitzking in my LSS BDL, be sure to seat bullet out to the rifling. Mine shoots very well. This load is a compressed load in Federal cases, and I have found will almost always shoot better than a non-compressed load IMO. You may also want to try the H380 powder. I have a 55 grain bullet compressed load that uses it and will go 4000 FPS.
257roberts is offline  
Old June 10, 2007, 09:02 PM   #3
crowbeaner
Senior Member
 
Join Date: June 4, 2007
Location: Upstate SC
Posts: 1,938
Right now I'm loading 37.0 of IMR 4895 over the 85 gr. Sierra BTHP with a RP lr primer. That is max. so work up. My son's M788 will shamrock them at 100 yds. I'm going to try 4320 in the near future, but he's pretty happy the way things are. Gets that from his mother I guess.
crowbeaner is offline  
Old June 16, 2007, 05:30 AM   #4
dodge
Senior Member
 
Join Date: July 10, 2001
Location: ridgerunner from Northern PA
Posts: 288
I use 38 grs of 4064 behind the 85 gr HPBT in Federal brass with CCI 200 out of my Savage.
dodge is offline  
Old June 16, 2007, 11:05 AM   #5
stinger
Senior Member
 
Join Date: November 6, 2001
Location: west texas
Posts: 772
85gr HPBT Sierra GameKings - if your rifle won't shoot these well, then your rifle just won't shoot.

I'm also in agreement with Dodge over the powder. IMR4064 is great. 37g's is my magic load, and it is relatively on the low side. I'd suggest starting around there and working up slowly.


My primers always show pressure signs with 4350 (CCI's) and even though the only sign, it makes me a bit nervous. But I think it is worth experimenting in your loads as well, it is kinda the classic .243 powder.
stinger is offline  
Old June 16, 2007, 11:36 AM   #6
T-Mac
Member
 
Join Date: January 18, 2006
Location: Townsend, MT
Posts: 99
I like Berger 68Gr. Match, pushed w/4350.
T-Mac is offline  
Old June 16, 2007, 09:53 PM   #7
jstoots
Junior Member
 
Join Date: May 30, 2007
Posts: 10
700 Adl

My Rem. 700 ADL likes 4064-41.5 with 70 gr. matchkings. That load may work well with blitzkings if you play with the seating depth a little. They should be explosive on woodchucks!
jstoots is offline  
Old June 17, 2007, 06:34 AM   #8
boltgun71
Senior Member
 
Join Date: January 4, 2006
Location: Pennsylvania
Posts: 541
Thanks a-loy guys! This is exactly the info I was looking for. As soon as I get the .243 scoped and load up a few rounds I will post a report for you on how everything works out. Thanks again.
boltgun71 is offline  
Old June 19, 2007, 04:25 PM   #9
elkman06
Senior Member
 
Join Date: March 14, 2006
Location: Wyoming
Posts: 885
I'm shooting 1/2in groups at 100yds w/ 100gr anything over 4831sc powder and mag primers.
elkman
elkman06 is offline  
Old June 19, 2007, 04:53 PM   #10
YosemiteSam357
Senior Member
 
Join Date: April 8, 2002
Location: Oregon, USA
Posts: 231
I've had exceptionally good luck with Nosler 55gr ballistic tips on the low end, and 95gr b tips in the mid-high range. Also good luck with Sierra 70grs. I don't have the exact load data on hand, but I know I had my best luck with IMR 3010.

I love the range of bullets/loads the .243 is capable of! Very underrated caliber, IMO.

-- Sam
YosemiteSam357 is offline  
Old June 20, 2007, 01:29 PM   #11
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,431
My best results were with Hornady 87 gr HPBT with H450 (no longer available). I haven't run out yet, but when I do I wil have to work up a new load.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08138 seconds with 9 queries