The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 25, 2007, 08:11 PM   #1
millers5285
Member
 
Join Date: November 25, 2006
Location: San Antonio, TX
Posts: 77
Unique for 44Mag, 45 ACP, and 45 Colt

I got into reloading pistols/revolvers about 1 a year ago and reload 5 calibers. I'm using different powders for each and would like to use the same powder that would be good for 44 Mag, 45 ACP, and 45 Colt. I saw in my manuals that Unique can be used for all 3. How is Unique for these calibers?
millers5285 is offline  
Old May 25, 2007, 08:23 PM   #2
hodaka
Senior Member
 
Join Date: April 23, 2006
Location: South Texas
Posts: 1,775
Don't know about the .44's, but it works fine in .45LC, .45ACP, 9mm(several versions), .357, .38, and in some of my cast rifle loads. I'm a Unique fan.
hodaka is offline  
Old May 25, 2007, 11:24 PM   #3
gandog56
Senior Member
 
Join Date: May 31, 2006
Location: Mobile, Alabama
Posts: 958
I've used it in .44 mag, but I like 2400 better.
__________________
Some people think I'm paranoid because I have guns. If I have guns, what do I have to be paranoid about?
gandog56 is offline  
Old May 26, 2007, 05:07 AM   #4
Stargazer
Senior Member
 
Join Date: August 6, 2006
Location: Republic of Texas
Posts: 505
I used Unique for the last 25+ years in my 45 ACP's. It works great and is even cleaner than before now. I also use it for my 7.62x39mm grenade launching cartridges. I have used it in reduced rifle loads too, you can make a .223 act like a .22 magnum if desired.

I have finaly settled on Unique as my .357 load for practice using 7.7 grains behind a 140 or 158 grain pill. For full blown .357's I use WW296 but for everyday use the Unique gives you almost (1000) rounds from a pound, quite economical in the .357.

You can not load Unique to get max velocity of of a particular cartridge as Unique reaches peak pressure for the firearm quicker than some other powders. But for practice loads it is hard to beat.
__________________
5.56mm, reach out and touch something. .458 SOCOM,reach out and knock something down.


M70 Web Page
Stargazer is offline  
Old May 26, 2007, 05:45 AM   #5
DonR101395
Senior Member
 
Join Date: October 30, 2005
Location: NWFL
Posts: 3,029
I use it for .45, 9mm, .38, .357 light loads I usually use H110 for .44 and .357 full power loads.
DonR101395 is offline  
Old May 26, 2007, 09:27 AM   #6
azredhawk44
Junior member
 
Join Date: September 28, 2005
Location: Mesa, AZ
Posts: 6,465
I don't care for the "feel" Unique gives in 44magnum. Very poppy, I can't describe it well.

I have used AA#7 for 44mag and 45acp with good results. It's not as economical as Unique (around 10.0gr for 45acp loads depending on bullet, around 15.0gr for 44mag), but it feels great in that caliber for me.

I've just accepted that each caliber is going to have a powder that I like. I use Titegroup for 45acp, AA#7 for 44magnum.
azredhawk44 is offline  
Old May 26, 2007, 09:37 AM   #7
Powderman
Senior Member
 
Join Date: September 7, 2001
Location: Washington State
Posts: 2,151
For .44 Magnum?

8.5 grains Unique under a 250 grain Keith type LSWC, any case, any primer.

Tack driver in my Model 29.
__________________
Hiding in plain sight...
Powderman is offline  
Old May 26, 2007, 07:33 PM   #8
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,340
Unique is one of the truly great pistol powders. Yes, it is a bit smudgy, but it burns completely so you don't have a bunch of flakes working down into the action. It is extremely versatile. I have loaded

In 45 Colt- 8.0 gr behind a 250 gr for plinking, more for hotrod rounds.
In 45 ACP- 7.7 gr behind a 185 JHP, 6.4 gr behind a 230 gr FMC
In 44 Mag- 11.0 behind a 240 gr (hot), 7.0 gr behind a 240 gr cast.
In 357- 7.7 gr behind a 158 gr JFP for target, more for hotrod rounds.
In 9mm P- 5.5 gr behind a 125 FMJ
In 38 Special- 4.8 gr behind a 158 gr cast

Generally, I use Blue Dot for full house magnum loads in 357 and 44 Mag.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07797 seconds with 9 queries