The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 4, 2007, 03:25 AM   #1
dirty habit
Member
 
Join Date: December 18, 2006
Location: New Zealand
Posts: 57
139g corelokts in 7mm

Im loading up for my 7/08, just got some corelokts today and not sure if they "look" right? Theyre about 23mm long which is just under an inch and when i seat them to be just off the lands, the cartridge overall is 63mm which from what i can gather is quite short for a 7/08 round?
Im also using corelokts 139g in my 6.5x55 and they look completely different to these. The 7mm looks more like a round nose with a lot more lead showing up front.
Just wanted to see if this is the way it is or not? Normally when i find something "different" i tend to stop befor i get too far and make sure im on the right track!
Cheers
__________________
Happiness.......is a warm gun
dirty habit is offline  
Old April 8, 2007, 03:14 PM   #2
williamd
Senior Member
 
Join Date: March 13, 2007
Location: SoCal
Posts: 801
Certainly the two calibres will looks a somewhat different to get the same weight into bullets of different diameters. 6.5 will necessarily be longer. If in doubt take the box back to the shop and ask to compare with others .. the packaging could (remote) get hosed.

Bullet manufacturers usually publish (hardback or web) data that includes pictures. Hornady is great for this data ... on their bullets, of course. Speer is okay. ... Sierra and Winchester are okay.
__________________
"Outlaw guns and only outlaws will have guns!" Unfortunately, we may be moving in that direction.
NRA Benefactor, Conservative!, VN '64-'65.
Never sell a gun or a car ... and retire rich!
williamd is offline  
Old April 8, 2007, 07:37 PM   #3
lockedcj7
Senior Member
 
Join Date: February 15, 2007
Posts: 964
I've reloaded some Rem. PSPCL in 7mm-08 and here's what I came up with.
They are seated to the cannelure, not .03 from the rifling as I normally would. (I was loading them for plinking and wasn't looking for best accuracy)
2.790 inches OAL on reloads (70.866mm)
2.785 inches OAL on factory loads (70.739mm)

I'd be willing to bet that your bullets are the round-nosed style often found in the 7x57. Mine have an ogive more like other modern spire-point bullets.

If anything, all the core-lokt bullets I have seen have less exposed lead at the tip than any other soft-point I have reloaded. Certainly less than Win. Power-Point, Sierra GameMaster, and Nosler Partitions in the same caliber.
lockedcj7 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06640 seconds with 9 queries