The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 20, 2007, 03:56 PM   #1
Cpl Nobbs
Member
 
Join Date: February 1, 2007
Posts: 65
30-06 "calibers"

I have what may be a very stupid question.

for a M1 Garand, can I load any .308 round for it? IE: I have a box of Hornaday .30 cal .308 150 grain BTSP and a box of Hornaday .30 cal .308 110 grain FMJ (bought to load for a M1 Carbine). can I load the 110 FMJ (with appropreate charge) into 30-06 cases and shoot them in the Garand?
Cpl Nobbs is offline  
Old March 20, 2007, 04:03 PM   #2
Dave R
Senior Member
 
Join Date: January 7, 2000
Location: Idaho
Posts: 6,073
I'm not an M1 guru, but my guess is you'll have a very hard time getting a load that will cycle your action reliably with those 110 grain bullets.

The 150's should work well. Any .308 bullet near the weight of surplus ammo (which is what it was designed for) can be made to work, with appropriate powder charges.

Speer No. 13 has some loads "starred" as appropriate for the M1 and other gas-operated semi-autos.
__________________
I am Pro-Rights (on gun issues).
Dave R is offline  
Old March 20, 2007, 10:32 PM   #3
Ruger4570
Senior Member
 
Join Date: April 3, 2005
Location: Rochester, New York
Posts: 2,136
The M1 is not a good gun to play around with with other than close to original 30-06 velocities in military weight bullets. It is possible to damage the op rod with loads that create too much pressure and not operate at all or poorly with smaller charges. I would advise sticking with loads close to the military 06 loads
Ruger4570 is offline  
Old March 20, 2007, 11:02 PM   #4
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
Your best bet is to stick fairly close to original military loadings.
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Old March 21, 2007, 12:59 PM   #5
Cpl Nobbs
Member
 
Join Date: February 1, 2007
Posts: 65
good thing I checked then. thank you very much Gentlemen. 150 - 180 grain it is!

Cpl. Nobbs
Cpl Nobbs is offline  
Old March 21, 2007, 06:29 PM   #6
Tim R
Senior Member
 
Join Date: November 30, 2004
Location: God's side of Washington State
Posts: 1,601
There are some guys who use Sierra 125's for the short line. I have used Speer 130 Hp's myself for 100 and 200 yard matchs in my '06 M-1. I would not go over 175 gr. bullets in the M-1.
__________________
God Bless our Troops especially our Snipers.
Tim R is offline  
Old April 8, 2007, 10:31 AM   #7
Cpl Nobbs
Member
 
Join Date: February 1, 2007
Posts: 65
thank you Tim. you must be not too far from me, the east side of the State. (North Idaho here)
Cpl Nobbs is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07952 seconds with 9 queries