The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old April 4, 2007, 04:51 PM   #1
MakarovFan
Member
 
Join Date: June 21, 2006
Location: Eastern Ohio
Posts: 92
Reloading Press

I currently have a press that I seem to no longer to be able to get shell holders for. I currently load 38/357 with this press.

I am looking for a single stage press as this is what i currently have and seems to fit my needs.

My question is likes or dislikes on brands, Lee, RCBS Hornady. I probally will only be using it for 9mm and if I start shooting the 45 more - than that caliper also.
MakarovFan is offline  
Old April 4, 2007, 05:16 PM   #2
Don H
Senior Member
 
Join Date: May 8, 2000
Location: SLC,Utah
Posts: 2,705
Probably get more response in the Handloading and Reloading section.
Don H is offline  
Old April 4, 2007, 06:16 PM   #3
Randy_che
Member
 
Join Date: July 28, 2005
Location: Houston, Texas
Posts: 56
1. There are adapters to put into your press so that you can use new style shellholders.

2. All kinds of old style shellholders are on eBay.

3. I have a fairly old RCBS Rockchucker and a Lee Challenger. The Rockchucker is a great press, but is not so great at catching primers. Neither is the Lee. I hear the Lee Classic Cast with the primer tube coming from the bottom of the ram is super solid and catches all the primers. That's probably what I'd get if I were getting a new one right now.
Randy_che is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05895 seconds with 9 queries