The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 27, 2007, 09:19 AM   #1
ShootingNut
Senior Member
 
Join Date: December 27, 2006
Location: Wisconsin
Posts: 1,468
What do you use

to clean the "wax" off cartridge, from loading lead bullets. Turkish towel works, just thought maybe there was a solution of some type being used?
Not all need cleaning of course, but don't care for that getting into the semi automatic to gum things up. New to loading, having a ball and starting to pickup some speed with the Lee Classic Turret Press.
Thanks
ShootingNut is offline  
Old March 27, 2007, 09:40 AM   #2
JoeHatley
Senior Member
 
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135
Champher your brass inside mouth and bell your brass a bit more, and the problem of shaving the lube should go away.

Mineral spirits or lighter fluid on a cloth should clean up the loaded rounds you have on hand. Just don't use too much fluid, and pay attention to keep it away from the primer area.

Good Luck...

Joe
__________________
Go NRA
JoeHatley is offline  
Old March 27, 2007, 11:05 AM   #3
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
Tumble the loaded rounds in corncob media with a few tablespoons of mineral spirits.

If you're not comfortable with that, a hand towel or shop towel with alcohol works great.

But the easiest solution, as noted above, is to adjust your belling die and seating die so that you don't get it on the outside in the first place.
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Old March 28, 2007, 06:02 AM   #4
ShootingNut
Senior Member
 
Join Date: December 27, 2006
Location: Wisconsin
Posts: 1,468
Thank you members!
ShootingNut is offline  
Old March 28, 2007, 11:07 AM   #5
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,043
I've always wiped the cartridges with automotive shop rags. Just coarse enough to clean the wax off the bullets, cases, whatever. Eventually they get washed in the bucket with the other rags from the garage...

Art
__________________
You're from BATFE? Come right in! I use all your fine products!
Art Eatman is offline  
Old March 28, 2007, 11:47 AM   #6
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
Chamfering & belling has never eliminated lube on the cases for me. It keeps it to a minimum, but the noses get lube too and it will come off in the seater die and collect in the die and evr so often I pull and clean the die so it doesn't push the bullets deeper than intended.

A clean dry cotton rag is used before boxing them up.
Edward429451 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06757 seconds with 9 queries