The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 21, 2007, 05:30 PM   #1
ammo.crafter
Senior Member
 
Join Date: June 25, 2006
Location: the Garden State
Posts: 800
.44 Mag

Anyone have a load for wild boar? Thinking of using my 44 mag Marlin. I was thinking of using Hornady 300 grains.

THX
__________________
"The Constitution is not an instrument for government to restrain the people, it is an instrument for the people to restrain the government, lest it come to dominate our lives and interests."
Patrick Henry, American Patriot
ammo.crafter is offline  
Old March 22, 2007, 02:35 AM   #2
Charshooter
Senior Member
 
Join Date: March 10, 2007
Location: Ozarks
Posts: 215
Hornady lists 2400 at starting with 14.2 gr at 1000 fps and a top load at 17.5 grains at 1250, I have used this powder with good results. I have also used h 110 starts at 16.7 at 1000 fps and top load at 19.6 grs at 1250 fps. I have used the full H 110 loads with good accuracy. Also Blue Dot at 10.8 grain at 1000 fps and I have loaded this as a light load with this powder. All these come from the forth edition. These are from a Ruger Super Blackhawk revolver. I use the 2400 most of the time for hunting deer or hogs.

In a Marlin you will get about 1400 fps with the 2400 17.5 grain load. H 110 will give a little more, you can find higher velocity loads, but this is what I recommend.

BTW: be sure to start with the lowest load and work up!
__________________
Born pre-war and proud of it!

No loud hippity hop rock music please!
Charshooter is offline  
Old March 22, 2007, 03:17 PM   #3
tINY
Senior Member
 
Join Date: April 26, 2005
Location: Orygun
Posts: 2,589

In a strong action, a 95-105% by volume load of H110 under a Hornady XTP 300 grain is a pretty good choice.

You might also try these:
http://www.castperformance.com/Detail.bok?no=16



-tINY

tINY is offline  
Old March 22, 2007, 05:26 PM   #4
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
Ditto the above.

A good 310 grain hardcast bullet would also be an excellent choice.
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07257 seconds with 9 queries